Connection To The Water Network - Saeco NEXTAGE CAP010 Operation And Maintenance Manual

English
Make a 100 mm Ø hole on the surface (hole A in the figure).
Install the machine in its final position on the supporting
surface (the rings B indicate the ideal position of the
adjustable feet).
Level the machine by setting the adjustable feet.
FR Machine front side
A Hole to be made
B Ideal position of the adjustable feet
5.3 Connection to the Water
Network
Before connecting
appliance to the water
network, please read and
follow the
regulations in force in your
country.
76
Screw the drain pipe assembly at the base of the frame as
shown in the figure.
the
Insert the drip tray into the machine front.
applicable
Make sure
network provides drinking
water, with
ranging between 0.15 MPA
and 0.8 MPA (1.5 and 8
bars).
Water hardness should not
be lower than 8°F.
the water
pressure