Subscribe to Our Youtube Channel
Related Manuals for Dragino LDS01
Summary of Contents for Dragino LDS01
- Page 1 LDS01 – LoRaWAN Door Sensor User Manual Document Version: 1.0.1 Image Version: v1.0 Version Description Date Release 2020-Feb-1 LoRaWAN Door Sensor User Manual 1 / 15...
-
Page 2: Table Of Contents
Introduction ..........................3 What is LDS01 LoRaWAN Door Sensor ..................3 Features ............................4 Applications ..........................4 Dimension ........................... 4 Firmware Change log ......................... 4 Power ON LDS01 ........................5 How to install LDS01 ......................... 6 Operation Mode ........................7 How it works? .......................... -
Page 3: Introduction
The Dragino LDS01 is a LoRaWAN Door Sensor. It detects door open/close status and uplink to LoRaWAN network. The LDS01 is small sensor; the dimension is as small as 64 x 30 x 14 mm. LDS01 is powered by a CR2032 coin battery, in a good LoRaWAN Network Coverage case, it can transmit as many as 12,000 uplink packets (base on SF7, 14dB). -
Page 4: Features
Logistics and Supply Chain Management Smart Metering Smart Agriculture Smart Cities Smart Factory 1.4 Dimension 1.5 Firmware Change log LDS01 Image files – Download link Image v1.0 Release LoRaWAN Door Sensor User Manual 4 / 15... -
Page 5: Power On Lds01
2. Power ON LDS01 When receive the LDS01, please open the enclosure and remove the isolated paper and PRESS RESET so the coin battery can power on the device and device runs on low power mode. The will blink when devices is powered. -
Page 6: How To Install Lds01
3. How to install LDS01 LoRaWAN Door Sensor User Manual 6 / 15... -
Page 7: Operation Mode
Here shows an example for how to join the TTN Network. Below is the network structure, we use our LG308 as LoRaWAN gateway here. The LDS01 in installed on the door edge to detect the open / close event. And send the status to LoRaWAN server. The LDS01 will uplink two type of messages to the server. - Page 8 Add APP KEY and DEV EUI Step 2: Power on LDS01 and it will auto join to the TTN network. After join success, it will start to upload message to TTN and user can see in the panel. LoRaWAN Door Sensor User Manual...
-
Page 9: Uplink Payload
Status&BAT Total open Last door open Always:0x01 door events duration (unit: min) Example: Example Payload Decoder in TTN: http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LDS01/Payload/ 4.4 Downlink Payload Downlink Control Type Type Code Downlink payload size(bytes) TDC (Transmit Time Interval—Keep Alive Interval) 0x01 RESET 0x04... -
Page 10: Integrate With Mydevice
If the payload=0100003C, means to control the LDS01’s Keep Alive interval to 0x00003C=60(S) Type Code 0x04 If payload = 0x04FF, it will reset the LDS01. Type Code 0xA6 Example: 0xA601: Clear Counting For LDS01: reset both count number and time. - Page 11 Step 3: Create an account or log in Mydevices. Step 4: Search LDS01 and add DevEUI. LoRaWAN Door Sensor User Manual 11 / 15...
-
Page 12: Leds
BLUE LED blinks once 4.7 Battery LDS01 is powered by a CR2032 coin battery, when running in deep sleep mode, the device power consumption is ~5uA. The main power consumption is transmitting an uplink message. Depends on LoRaWAN network signal strength, the device can send different number of uplink messages. -
Page 13: Use At Command
5. Use AT Command 5.1 Access AT Command LDS01 supports AT Command set. User can use a USB to TTL adapter to configure LDS01 via use AT command, as below. USB to TTL <- -> LDS01 RX <- -> TX TX <- ->... -
Page 14: Faq
6. FAQ 6.1 How to upgrade the image? User can upgrade the firmware of LWL01 for bug fix, new features, or change working region. The upgrade instruction are here: http://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction 6.2 How to change the LoRa Frequency Bands/Region? User can follow the introduction for how to upgrade image. -
Page 15: Order Info
US915: frequency bands US915 IN865: frequency bands IN865 CN779: frequency bands CN779 8. Packing Info Package Includes: LDS01 x 1 Dimension and weight: Device Size: 64 x 30 x 14 mm 9. Support Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support.
Need help?
Do you have a question about the LDS01 and is the answer not in the manual?
Questions and answers