Adjusting The Screen Activation Settings - Philips TSU7000 User Manual

Customizing ProntoPro NG

Adjusting the Screen Activation Settings

In the third Settings Page you can adjust the screen activation settings. You can
define when or if you want the LCD backlight to be activated. You can also set
when or if you want the ProntoPro NG to send out IR codes or perform button
actions.
You can adjust the following screen activation settings:
Firm keys settings;
Cursor keys settings;
Pickup sensor settings.
Tip
Adjusting the Firm Keys Settings
You can set the firm keys settings to 3 different states. The firm keys are located
below the touch screen of your ProntoPro NG.
To adjust the firm keys settings of the ProntoPro NG, tap
in the third Settings Page. You can now toggle between the following 3 firm keys
states:
ProntoPro NG will send out the IR code or perform the action assigned to this
key.
The LCD backlight will not be activated when pressing a firm key.
LCD backlight will be activated and your ProntoPro NG will send out the IR
code or perform the action assigned to this key.
press one of the 4 firm keys, the LCD backlight will be activated.
The ProntoPro NG will not send out an IR code nor perform the button action.
User Guide
36
You can adjust the timeout for the LCD backlight. For more information, see
'Setting the Timeout of the LCD Screen' on page 33.
: This setting implies that when you press one of the 4 firm keys, your
: This setting implies that when you press one of the 4 firm keys, the
: This is the default setting of your ProntoPro NG. It implies that when you