Philips TSU7000 User Manual page 22

Customizing ProntoPro NG
Selecting the Brand and searching the Code Set for your device
Note
1 Tap and hold the ProntoPro NG icon
touch screen for 3 seconds. The Tools Menu appears.
2 Tap
The 'Brand Tool' screen appears.
3 Tap
The Device Overview appears.
4 In the Device Overview, tap the Device for which you want to define
the brand.
A message screen appears.
5 Tap
The 'Brands' screen appears.
6 Select the brand of your device as described in 'Selecting the brand'
on page 21.
Searching the code set
1 Tap
The 'Searching the Code Set' screen appears.
2 Tap
The 'Searching' screen appears. ProntoPro NG searches through the list of
code sets for the selected brand, by sending out an IR code for each code set.
3 When the device for which you are defining the brand, turns off,
tap
The 'Installing the Brand' screen appears.
4 To install the brand and code set, follow the instructions described in
'Installing the brand' on page 21.
Searching the Brand and Code Set for your device
1 Tap and hold the ProntoPro NG icon
touch screen for 3 seconds. The Tools Menu appears.
2 Tap
The 'Brand Tool' screen appears.
3 Tap
The Device Overview appears.
User Guide
22
Make sure the device for which you are searching the brand is turned on.
in the Tools Menu.
in the 'Brand Tool' screen.
.
in the 'Code Sets' screen.
and point ProntoPro NG at the device.
in the 'Searching' screen.
in the Tools Menu.
in the 'Brand Tool' screen.
in the upper left corner of the
in the upper left corner of the