Key Combinations; Faq Information And Latest Updates - Philips TSU9800 Starter Manual

TSU9800 Starter's Guide
The Control Panel shows one of the following icons
Wireless Ethernet
The Network Activity icon is not shown on the screen of the Control Panel
You cannot see the Network Activity icon:
• When the extenders and the Control Panel are configured in Stand-Alone.
• When you disabled the system item Network Activity in the ProntoEdit Professional.
The Control Panel behaves erratically
Normally, resetting the Control Panel is not necessary. However, if the touch screen freezes or if you
notice unusual behavior, you need to perform a reset to get it running again.
You reset the Control Panel by switching the Power switch to 'Off', waiting a few seconds and
switching the Power switch back to 'On'.

Key Combinations

To access the Reset function for the Control Panel:
• First press Page Up, then also press Menu
and Home.
To access the Calibration Mode:
• First press Backlight, then also press Menu
and firm key 1.
To access the Diagnostics Mode:
• First press Backlight, then also press Menu
and firm key 2.

FAQ Information and Latest Updates

You can find more information on http://www.pronto.philips.com.
Navigate to the Support section for more FAQ Information.
Navigate to the Downloads section for the following updates:
• TSU9800 Control Panel Firmware;
• RFX9400 and RFX9600 Extender Firmware;
• ProntoEdit Professional Software.
Note Installing the latest update of the ProntoEdit Professional software will overwrite all files
and delete the personal images you added to the gallery. Make sure to update the gallery
when requested in the wizard to copy your personal images to the new gallery.
13
No connection
• The Wireless Access Point is powered down.
• The Control Panel is out of range of the Wireless Access point.
• There is an encryption problem.
• The router may have to be reset after changing from wireless to
Ethernet or vice versa.
No IP address
• There is no IP address received.
• An IP conflict is detected.
Backlight
Page Up
Firm key 1
Firm key 2
Menu
Home