Preparing For Configuration; Charging The Control Panel; Installing Prontoedit Professional - Philips TSU9800 Starter Manual

TSU9800 Starter's Guide

Preparing for Configuration

Charging the Control Panel

It is advised to charge the Control Panel to its maximum before you start configuring it. This can
take up to 4 hours.
1
Activate the Control Panel by switching the Power switch
at the bottom of the Control Panel to 'On'.
2
Place the Control Panel in the docking station.
A red glow on the docking station will be visible while the Control Panel is
charging.
Note The docking station spreads a white glow when it is powered. To turn off the white
docking glow, set the switch at the back of the docking station to 'Off'.

Installing ProntoEdit Professional

In the box you find a CD with which you install ProntoEdit Professional. You can also check for
updates on http://www.pronto.philips.com in the Downloads section (PC Software).
Insert the CD in the PC and follow the on screen instructions to install the editor.
Notes • Although ProntoEdit Professional can be installed together with older Philips Pronto
editors, we strongly recommend using this integrated editor for all your configuring.
• If you want to update ProntoEdit Professional and you have inserted personal images in
the Gallery, you can make a back up of the gallery. You will be noted to do so in the
installation wizard.
5