Table of Contents
Advertisement
EC DECLARATION OF CONFORMITY
1.
Product model: IM-IPC40
2.
Name and address of the manufacturer or his authorised representative:
3.
This declaration of conformity is issued under the sole responsibility of the manufacturer.
4.
Object of the declaration:
Equipment: 40A Plasma Cutter
Brand name: IMPAX
Model/type: IM-IPC40
5.
The object of the declaration described above is in conformity with the relevant Union harmonisation
legislation:
2006/42/EC. Machinery Directive.
2006/95/EC. Low Voltage Directive.
2004/108/EC. Electromagnetic Compatibility Directive.
93/68/EC. CE Marking Directive.
2011/65/EU. Restriction of the Use of certain Hazardous Substances in Electrical and Electronic
Equipment (RoHS) Directive.
2002/96/EC as amended by 2003/108/EC. Waste Electrical and Electronic Equipment (WEEE) Directive.
6.
References to the relevant harmonised standards used or references to the other technical
specifications in relation to which conformity is declared:
EN IEC 60974-1
BS EN IEC 60974-1
7.
The person authorized to compile the technical file:
Name: Sérgio Fernandes
Address: Nuair Ibérica, Lda. Rua da Zona Industrial, 560, 4520-114, SMF, Portugal
Signed for and on behalf of:
Authorised Representative
Sérgio Fernandes, Technical Manager
03/03/2022
Nuair Ibérica, Lda. Rua da Zona Industrial, 560, 4520-114,
Santa Maria da Feira, Portugal
Tel: +351 256 580 930. Email: sat@nuair.pt
EN IEC 60974-10
BS EN IEC 60974-10
35
22
Advertisement
Table of Contents
