Yamaha MTN690-U Owner's Manual page 25

 "AVE_ _._ MPG": the average dis-
tance that can be traveled on
1.0 Imp.gal of fuel.
TIP
 To reset the display, change the
display to the average fuel con-
sumption display, and while the
digits are flashing, push the "IN-
FO" switch until it is reset.
 After resetting, "_ _._" is shown
until the vehicle has traveled some
distance.
Coolant temperature display
1
1. Coolant temperature display
This display shows the coolant tem-
perature from 40 °C to 116 °C in 1 °C
increments.
If the message "Hi" flashes, stop the
vehicle, then stop the engine, and let it
cool. (See page 6-36.)
TIP
 When the coolant temperature is
below 40 °C, "Lo" will be dis-
played.
 The coolant temperature varies
with changes in the weather and
engine load.
Air temperature display
EAU90900
1. Air temperature display
This display shows the air temperature
from –9 °C to 99 °C in 1 °C increments.
The temperature displayed may vary
from the actual ambient temperature.
3-10
Instrument and control functions
TIP
When the temperature is below –9 °C,
"Lo" will be displayed.
Brightness control mode
EAU90923
1. Brightness level display
The brightness level of the multi-func-
tion meter unit panel can be adjusted.
To adjust the brightness
1. Turn the vehicle power off.
1
2. Push and hold the "INFO" switch.
3. Turn the vehicle power on and
continue pushing the "INFO"
switch until the display switches
to the brightness control mode.
4. Push the "TRIP" switch to set the
brightness level.
EAU92261
1
3