Yamaha MTN690-U Owner's Manual page 24

Instrument and control functions
To reset the fuel reserve tripmeter,
change the display to the fuel reserve
tripmeter, and while the digits are
flashing, push the "INFO" switch until it
is reset.
3
TIP
If you do not reset the fuel reserve trip-
meter manually, it will reset automati-
cally and disappear from the display
after refueling and traveling 5 km (3 mi).
Instantaneous fuel
display
1. Instantaneous fuel consumption display
This display shows the fuel consump-
tion under the current riding condi-
tions. It can be set to either "km/L" or
"L/100 km", or "MPG" when using
miles. To switch the fuel consumption
measurement units, push the "TRIP"
switch until the measurement units
change.
 "km/L": the distance that can be
traveled on 1.0 L of fuel.
 "L/100 km": the amount of fuel
necessary to travel 100 km.
 "MPG": the distance that can be
traveled on 1.0 Imp.gal of fuel.
TIP
When traveling under 10 km/h (6 mi/h),
EAU92241
consumption
"_ _._" is displayed.
TIP
The instantaneous fuel consumption
function should be used for general
reference only. Do not use this figure to
estimate the distance that can be trav-
eled on the current tank of fuel.
1
Average fuel consumption display
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
EAU87790
can be set to either "AVE_ _._ km/L" or
"AVE_ _._ L/100 km", or "AVE_ _._
MPG" when using miles. To switch the
fuel consumption measurement units,
push the "TRIP" switch until the mea-
surement units change.
 "AVE_ _._ km/L": the average dis-
 "AVE_ _._ L/100 km": the average
3-9
1
tance that can be traveled on 1.0 L
of fuel.
amount of fuel necessary to travel
100 km.
EAU92251