Carrier 50HJQ004 Installation, Start-Up And Service Instructions Manual page 37

GENERAL NOTES FOR FAN PERFORMANCE DATA TABLES
1. Extensive motor and electrical testing on these units ensures that the full range of the motor can be utilized with confidence. Using the
fan motors up to the wattage ratings shown will not result in nuisance tripping or premature motor failure. Unit warranty will not be
affected. For additional information on motor performance, refer to Tables 11 and 12.
2. Values include losses for filters, unit casing, and wet coils.
3. Use of a field-supplied motor may affect wire sizing. Contact your Carrier representative for details.
4. Interpolation is permissible. Do not extrapolate.
5. Performance includes clean filters and wet coil data.
Table 15 — Fan Performance 50HEQ003 — Vertical Discharge Units; Standard Motor (Belt Drive)**
AIRFLOW
(Cfm)
Rpm
600
500
700
529
800
547
900
570
1000
599
Table 16 — Fan Performance 50HEQ004, 50HJQ004 — Vertical Discharge Units; Standard Motor (Belt Drive)*
AIRFLOW
0.2
(Cfm)
Rpm Bhp
900
566 0.14
1000
598 0.17
1100
632 0.21
1200
666 0.25
1300
701 0.30
1400
737 0.36
1500
774 0.42
AIRFLOW
1.2
(Cfm)
Rpm Bhp
900
1029 0.63
1000
1052 0.70
1100
1076 0.77
1200
1100 0.85
1300
1126 0.94
1400
1152 1.03
1500
1179 1.13
LEGEND
Bhp --- Brake Horsepower Input to Fan
Watts --- Input Watts to Motor
NOTES:
Shaded cells indicate field-supplied drive is required.
See General Fan Performance Notes.
* Factory provided drive range 680 ---1044 rpm. All other rpms require field---supplied drive. Max continuous motor bhp is 1.20.
** Factory provided drive range 639 ---936 rpm. All other rpms require field---supplied drive. Max continuous motor bhp is 0.58.
EXTERNAL STATIC PRESSURE (in. wg)
0.1 0.2
Bhp Rpm Bhp Rpm
0.08 531 0.08 607
0.09 567 0.09 633
0.1 592 0.12 660
0.13 620 0.14 691
0.15 650 0.16 717
EXTERNAL STATIC PRESSURE (in. wg)
0.4
Watts Rpm Bhp Watts
142 690 0.23 228
173 718 0.27 267
210 748 0.31 311
252 778 0.36 361
300 809 0.42 418
355 842 0.48 481
417 875 0.55 551
EXTERNAL STATIC PRESSURE (in. wg)
1.4
Watts Rpm Bhp Watts
630 1095 0.75 742
695 1118 0.82 814
767 1141 0.90 892
845 1165 0.98 977
930 1189 1.07 1069
1023 1215 1.17 1168
1123 — — —
See Tables 13A and 13B for accessory/FIOP static pressure information.
0.4 0.6
Bhp Rpm Bhp Rpm
0.14 713 0.21 788
0.16 739 0.24 816
0.19 761 0.27 845
0.22 793 0.32 870
0.26 818 0.36 894
0.6
Rpm Bhp Watts Rpm
791 0.32 320
817 0.37 366
844 0.42 418
873 0.48 476
902 0.54 540
932 0.61 610 1012
962 0.69 689 1041
1.6
Rpm Bhp Watts Rpm
1157 0.86 859 1216
1179 0.94 937 1237
1202 1.03 1021 1260
1225 1.12 1112
— — —
— — —
— — —
37
0.8 1.0
Bhp Rpm Bhp
878 0.37
0.29
902 0.41
0.32
937 0.47
0.37
957 0.53
0.42
981 0.58
0.47
0.8
Bhp Watts Rpm
879 0.42 418 957
903 0.47 471 981
929 0.53 530 1006
956 0.60 594 1031
983 0.67 665 1057
0.75 744 1085
0.83 830 1112
1.8
Bhp Watts Rpm
0.99 980 1272
1.07 1064 1293
1.16 1154 —
— — — —
— — — —
— — — —
— — — —
1.0
Bhp Watts
0.52 522
0.58 581
0.65 646
0.72 718
0.80 796
0.89 881
0.98 974
2.0
Bhp Watts
1.11 1105
1.20 1195
— —
— —
— —
— —
— —