Ferroli NAPOLI 600 Installation And Use Instruction page 55

N A P O L I
5.3.5.6 Language
This menu is used to set the display language on the screens:
• SPANISH
• ENGLISH
Select the preferred language with the p and q keys, and confirm with OK.
5.3.5.7 Reset factory defaults
This menu is used to reset the emitter back to the default factory settings:
• Comfort set point is 20 °C,
• Economy set point is 16.5 °C,
• Program is set to Economy for all half-hour sections of all days,
• The day is set to Monday,
• The time is set to 00:00,
• Brightness level at rest is set to 1,
• Maximum brightness Time is set to 10 seconds,
• Open Windows and Adaptive start control are disabled,
• The language is set to Spanish,
• The emitter automatically returns to Standby mode.
5.4 HEATING AND TEMPERATURE DISPLAY
When the room temperature is below the temperature set point, the emitter will turn the element
on to raise the room temperature. To show the user that the emitter is heating there is an icon of a
thermometer being filled in the top right hand corner:
The room temperature is normally shown on the display; the set point temperature is only
displayed when the user attempts to change it; after the setting has been adjusted the display will
revert back to the room temperature.
The comfort and eco set point tem-
peratures can be modified both from
Comfort and Economy modes.
The comfort and eco set points can be
also changed within Program mode
if they are active at the time (the an-
ti-frost set point can never be modi-
fied).
A73023143
55
EN