Ferroli NAPOLI 600 Installation And Use Instruction page 49

N A P O L I
5. OPERATION
5.1 CONTROL PANEL
The control panel is made with a large TFT-LCD screen with white backlight and black images for
ease of legibility. There are six touch sensitive keys as outlined below:
5.2 TURNING THE EMITTER ON AND OFF
To turn on the emitter, it has to be plugged into the power supply (230 V ~ 50 Hz), through its
plug; the standby symbol or the current operating mode will appear on the display. It is turned off
removing the plug from the socket.
If the emitter is in Standby mode, to set it to Operational touch and hold the
Standby key; a double beep will sound once the emitter is Operational.
The standby screen changes to show the welcome screen and then the emit-
ter will start in the previous operating mode.
To configure the emitter in Standby mode, touch and hold the Standby key;
there will be a long beep and the farewell screen will appear.
The back light will turn off after 1.5 seconds.
A73023143
TFT-LCD screen
Standby key:
Switch the emitter
between Standby and
Operational
Confirm modes, days,
hours, etc.
Multi-Function, selection
of mode, temperatures,
parameters, day and
hour, etc.
Keyboard lock
Mode key:
Selecting the operating
mode
Go back to the previous
mode / menu
Manual mode
EN
49