Ferroli NAPOLI 600 Installation And Use Instruction page 42

IMPORTANT:
- In order to avoid overheating, do not cover the emitter.
The emitter itself is marked with the standard
"Do not cover" symbol.
- You must not sit on the emitter.
- This appliance is not intended for outdoor use.
- If the power cord is damaged, it must be changed by the
manufacturer, its after-sales service or persons qualified to
do so, to avoid possible danger.
- The emitter should not be located underneath an electrical
connection. The electric supply line should be protected with
a high sensitivity differential device.
- The emitter must be installed so that around it there is suffi-
cient space for proper circulation of hot air, with the minimum
distances indicated in LOCATION section. Anyone who is in
the bathtub or shower should not have access to the switch-
es and other power operation devices, respecting 0.6 m dis-
tance between the emitter and the bath or shower.
- Mounting is an important part of safety. To perform the cor-
rect installation, go to MOUNTING section.
- This appliance can be used by children aged 8 years and
above and persons with reduced physical, sensory or mental
abilities or lack of experience and knowledge, if they have
been given supervision or appropriate training regarding the
use of the device in a safe way and they understand the dan-
gers involved. Children should not play with the appliance.
Cleaning and maintenance should not be performed by un-
supervised children.
42
EN
N A P O L I
A73023143