Installing The M.2 Ssd Module - Dell PowerEdge XR4000w Installation And Service Manual

Figure 42. Removing the M.2 SSD module
Next steps
Replace the M.2 SSD module.

Installing the M.2 SSD module

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
Steps
1. Align the M.2 SSD module at an angle with the M.2 connector on the system board.
2. Insert the M.2 SSD module until it is firmly seated in M.2 connector.
50 Installing and removing system components