Flexcom TKSTAR TK806 Installation And Operating Instructions Manual page 20

Flexcom Communication Ltd
Set time zone
Turn GPRS mode on
and off
Query the position of the device
Description
Call the phone number of the device's SIM card
from your phone. After receiving the call, the
device interrupts it and then sends the data back
in an SMS message: latitude and longitude,
current speed, time and link, which, when clicked
/ tapped, will display the device's indicator on the
Google map in our phone's browser.
If the device cannot connect to GPS satellites (eg
inside a building or in another shaded area), use
the cell information of the GSM transmission
towers to determine its position (LBS, Location
Based Service). Its accuracy depends largely on
the distance from the towers and the mobile
network coverage.
Stopping the vehicle remotely
Description
The device's default time
zone is set to GMT + 0.
This is changed (eg in the
case of Hungary, the time
zone is GMT + 1), as
follows.
The GPRS data transfer
mode is switched off by
default in the device (GSM
mode is active). If you use
tracking software, the
GPRS mode must be
turned on.
If you have purchased the
device with a software
service subscription from
the dealer, the GPRS mode
is already activated!
SMS message
Installation and operating instructions (2021/03/29)
timezone123456 value (where value
e.g. +1, -2, 0 etc).
Például: timezone123456 +1 (Hungarian
time zone
setting)
Turning on
SMS: gprs123456
Turning off
SMS: nogprs123456
Device response
or LBS-based positioning
20/26
Time Ok
GPRS Ok
or
NOGPRS
Ok
Device response