Download Print this page
Flexcom TK306-3G Installation And Operating Instructions Manual

Flexcom TK306-3G Installation And Operating Instructions Manual

Car gps tracker

Advertisement

Quick Links

Flexcom Communication Ltd
Installation and operating instructions (2021/03/08)
Installation and operating instructions
TK306-3G car GPS tracker
Introduction
In developing the products we offer, the manufacturers have acted with the utmost care and in
accordance with international standards.
Warranty
We offer a 12-month warranty on the products, which is valid from the date of purchase. Keep the
invoice or block you received at the time of purchase and / or the warranty card of the device,
because you can only enforce your warranty claim if you have them. During the warranty period, we
will replace any defective main unit, accessory or software of the product in the event of any defect
attributable to a manufacturing, material or software defect. Subsequent repairs to the device or its
accessories are not permitted by the manufacturer due to the design of the device.
The warranty does not cover a product (or accessory) that has been damaged or rendered inoperable
due to attempts to modify or repair the software, physical impact, poor voltage, improper use.
To ensure proper, effective and safe use of the product, read the instruction manual carefully and
keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product
damage, short-term or long-term health damage that may occur as a result of use, repair, storage
and transport other than those described in this manual.
Rights, trademarks
© 2019, Flexcom Kommunikációs Kft.
All rights reserved. No part of our printed or online publications may be reproduced, distributed or
transmitted in any form or by any means, including photocopying, recording or other electronic and
mechanical methods, without the prior written permission of the publisher. To obtain a permit,
contact your dealer:
1/27

Advertisement

loading

Summary of Contents for Flexcom TK306-3G

  • Page 1 To ensure proper, effective and safe use of the product, read the instruction manual carefully and keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product damage, short-term or long-term health damage that may occur as a result of use, repair, storage and transport other than those described in this manual.
  • Page 2 Mobile 2: +36 70 3333 527 Phone service: (Monday-Thursday) 9.00–15.00 Every effort has been made to ensure that the information in our documents is accurate. Flexcom Kommunikációs Kft. Is not responsible for typographical errors and misspellings. Flexcom GPS Tracking Solutions, GPS Positioning System, Nyomkovetes.net is a registered trademark and domain name of Flexcom Kommunikációs Kft.
  • Page 3 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) Formats and notations The following style settings are used in descriptions, guides, and other documents: Name of product components, instructions, options, processes, services, user interface Bold text elements. Italic text Links to other publications, emphasis.
  • Page 4: Product Description

    Flexcom Communication Ltd Installation and operating instructions (2021/03/08) Product Description The device combines several functions of accurate positioning, safety, monitoring, emergency alarms and full tracking. It supports SMS / GPRS / Internet data transfer functions and can be widely used in many areas of location-based services, traffic safety and management.
  • Page 5: How To Use

    Flexcom Communication Ltd Installation and operating instructions (2021/03/08) How to use After inserting a SIM card and setting up via SMS or a mobile phone or PC application, the device is connected to the vehicle's electrical system. After switching on, the GPS receiver and the SIM card automatically connect to the GPS and GSM networks (if available) and start collecting position data, which can be queried using SMS or an internet application.
  • Page 6 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) 6/27...
  • Page 7: Technical Parameters

    Flexcom Communication Ltd Installation and operating instructions (2021/03/08) Technical parameters Physical characteristics Parameter Value Dimensions (mm) W: 50, L: 64, H: 27 Weight (g) Humidity from 5% to 95% (none condensing) Water resistance IP65 Operating temperature from -20C to +70C...
  • Page 8 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) Parameter Value Vibration sensor Interface Parameter Value GSM antenna Internal GPS antenna Internal 8/27...
  • Page 9: Installation

    Flexcom Communication Ltd Installation and operating instructions (2021/03/08) User's guide Transport and storage The packaging is designed to protect the product from the usual levels of physical impact during transport. Be careful to avoid effects other than these. The packaging of the product is not water, flame and heat resistant and only moderately pressure resistant.
  • Page 10 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) As with mobile phones, a SIM card is required to operate the device. The device communicates with the mobile service provider's network via SIM card, SMS or mobile phone or PC applications.
  • Page 11 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) If your mobile network provider has not provided you with an APN username and password, you do not need to send the following SMS messages to the tracking device! APN username apnuser123456 APN-username...
  • Page 12 For Android phones Open the Google Play app on your phone. Search for “Flexcom” or “Flexcom tracking” on Google Play. Install the tracking application. Scan the QR code shown here with your phone. Open the web address decoded from this.
  • Page 13 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) Use of the product User interface The connectors and controls on the device are located at both ends, under a protective cover, and on one side of the microphone. LED display statuses Status 1 flash per 1 second...
  • Page 14 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) Internal battery The device has a built-in battery that is independent of the vehicle, for approx. Allows 1 hour of operation. The battery is charged via the vehicle power supply. If you disconnect the device from the vehicle and want to operate it from its own battery, switch the battery on (or off) using the on / off...
  • Page 15 SIM card. Setting options via software A készülék működtetéséhez a Flexcom Kft saját fejlesztésű nyomkövető szoftvert is biztosít. A működést befolyásoló, a készülék telefonos SMS üzenetek útján elérhető gyári alapfunkcióit lefedő, de egyben azt lényegesen meg is haladó beállítási lehetőségeket a szoftver Beállítások, Parancsok és Riasztások funkciói biztosítják.
  • Page 16 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) Válassza ki a kívánt készüléket a térképen vagy a menüben. A Beállítások vagy Parancsok feliratú gombra kattintva kiválaszthatja a kívánt általános beállítást vagy működést. Mobil alkalmazás használata esetén: Az alkalmazás menüjében válassza a Térkép menüpontot.
  • Page 17 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) Váltson át az Eszközök panelre. Keresse meg az eszközök listájában a készüléket és koppintson az azonosító mellett levő Beállítás ikonra. Válassza ki a kívánt beállítást vagy parancs küldése esetén a Parancsok menüpontot.
  • Page 18 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) General settings Device Function Description SMS message response Factory default setting Reset the device to factory settings. begin123456 Begin Ok password<old password> <new password> Change password Change the factory default password (123456).
  • Page 19 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) A készülék XXX Send position data at másodpercenként YYY specified intervals, darab pozíció üzenetet fixXXXs***n123456 Position without quantity küld. Az XXX data limit. időintervallum minimum For example: fix030s***n123456 20 másodperc lehet. The device can be set to...
  • Page 20 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) results in the next stop message sent in point 2 stopping the vehicle immediately. You can make this setting earlier. Send stop123456 SMS to the phone number of the device. If the current setting of the device was previously “quickstop”, the vehicle will stop immediately (block the ignition) and this will...
  • Page 21 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) If the device is connected to an external power source (eg vehicle), you can set an alarm if it is switched off. Turning on: extpower123456 on The device sends the message to the...
  • Page 22 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) Description SMS message Device response Turning on: speed123456 sebességhatár You can set the device to send an SMS alert if the vehicle speed exceeds the For example: speed123456 070 specified limit. The speed limit must be entered in the form XXX, if less than A riasztó...
  • Page 23 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) To set the sensitivity, send the following in advance SMS message to the device: **sensitivity123456 X** where - X = 1 (alarm even in case of weak effect) - X = 2 (alarm only in case...
  • Page 24: Troubleshooting And Repair

    Flexcom Communication Ltd Installation and operating instructions (2021/03/08) Troubleshooting and repair Conditions for safe use of devices Information for people with long-term health problems or disabilities This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 25 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) Identifying problems and possible solutions Symptom Possible cause Solution The device does not turn on or turns off The battery may be Charge the battery. immediately after turning exhausted. it on. Check the strength of the GSM connection. If the LED is solid amber, there is no connection to the No GSM connection.
  • Page 26 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) During the warranty period, if the conditions of the warranty have not been violated, the distributor will take care of the professional investigation of the cause of the failure, repair of the error or replacement of the device.
  • Page 27 Flexcom Communication Ltd Installation and operating instructions (2021/03/08) Decommissioning Disposing and destroying the device If you decide to stop using the appliance, do not throw it away with the normal household waste. The device is a complex structure and its components contribute to environmental problems to varying degrees.