Flexcom LK720A Installation And Operating Instructions Manual

Flexcom LK720A Installation And Operating Instructions Manual

Vehicle tracker device

Advertisement

Quick Links

Flexcom Communication Ltd
Installation and operating instructions (2021/03/23)
Installation and operating instructions
LK720A vehicle tracker device
Introduction
In developing the products we offer, the manufacturers have acted with the utmost care and in
accordance with international standards.
Warranty
We offer a 12-month warranty on the products, which is valid from the date of purchase. Keep the
invoice or block you received at the time of purchase and / or the warranty card of the device,
because you can only enforce your warranty claim if you have them. During the warranty period, we
will replace any defective main unit, accessory or software of the product in the event of any defect
attributable to a manufacturing, material or software defect. Subsequent repairs to the device or its
accessories are not permitted by the manufacturer due to the design of the device.
The warranty does not cover a product (or accessory) that has been damaged or rendered inoperable
due to attempts to modify or repair the software, physical impact, poor voltage, improper use.
To ensure proper, effective and safe use of the product, read the instruction manual carefully and
keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product
damage, short-term or long-term health damage that may occur as a result of use, repair, storage
and transport other than those described in this manual.
Rights, trademarks
© 2019, Flexcom Kommunikációs Kft.
All rights reserved. No part of our printed or online publications may be reproduced, distributed or
transmitted in any form or by any means, including photocopying, recording or other electronic and
mechanical methods, without the prior written permission of the publisher. To obtain a permit,
contact your dealer:
Contact
1/23

Advertisement

Table of Contents
loading

Summary of Contents for Flexcom LK720A

  • Page 1 To ensure proper, effective and safe use of the product, read the instruction manual carefully and keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product damage, short-term or long-term health damage that may occur as a result of use, repair, storage and transport other than those described in this manual.
  • Page 2 Mobile 2: +36 70 3333 527 Phone service: (Monday-Thursday) 9.00–15.00 Every effort has been made to ensure that the information in our documents is accurate. Flexcom Kommunikációs Kft. Is not responsible for typographical errors and misspellings. Flexcom GPS Tracking Solutions, GPS Positioning System, Nyomkovetes.net is a registered trademark and domain name of Flexcom Kommunikációs Kft.
  • Page 3 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) Formats and notations The following style settings are used in descriptions, guides, and other documents: Name of product components, instructions, options, processes, services, user interface Bold text elements. Italic text Links to other publications, emphasis.
  • Page 4: Product Description

    Flexcom Communication Ltd Installation and operating instructions (2021/03/23) Product Description The device combines several functions of accurate positioning, safety, monitoring, emergency alarms and full tracking. It supports SMS / GPRS / Internet data transfer functions and can be widely used in many areas of location-based services, traffic safety and management.
  • Page 5: How To Use

    Flexcom Communication Ltd Installation and operating instructions (2021/03/23) How to use The device can be used after inserting and installing a SIM card and then setting it up via SMS or a mobile phone or PC application. Once installed, the GPS receiver and SIM card will automatically connect to the GPS and GSM networks (if available) and begin collecting position data, which can be queried using SMS or an Internet application.
  • Page 6 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) 6/23...
  • Page 7: Technical Parameters

    Flexcom Communication Ltd Installation and operating instructions (2021/03/23) Technical parameters Physical characteristics Parameter Value Dimensions (mm) Sz: 31, H: 57, M: 31 Weight (g) 29,3 Humidity 5%-től 95%-ig (none condensing) Water resistance IP65 (moisture and drip resistance) Operating temperature from -20C to +55C...
  • Page 8 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) Interface Parameter Value GSM antenna Internal GPS antenna Internal 8/23...
  • Page 9 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) User's guide Transport and storage The packaging is designed to protect the product from the usual physical effects during transport. Be careful to avoid effects other than these. The packaging of the product is not water, flame and heat resistant and only moderately pressure resistant.
  • Page 10 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) card from your dealer, you do not need to make any settings: the card is already set up, inserted in the device, switched on and ready for use. If you have received the SIM card from your dealer, do not try to transfer it to another device (eg phone) and use it! The distributor (service provider) will reimburse the resulting costs or the correction of the resulting errors.
  • Page 11 For Android phones Open the Google Play app on your phone. Search for “Flexcom” or “Flexcom tracking” on Google Play. Install the tracking application. 11/23...
  • Page 12 Installation and operating instructions (2021/03/23) Scan the QR code shown here with your phone. Open the web address decoded from this. Install the Flexcom tracking application. For iPhones Use the browser on your phone to access the service (https://gpspositions.net/map/). Using the product User Interface The device does not have a traditional user interface (eg on / off...
  • Page 13: Installation

    Flexcom Communication Ltd Installation and operating instructions (2021/03/23) LED display statuses Signal Meaning Green light stays on No GSM / GPRS connection Green light flashes Connected to a mobile network Blue light stays on No satellite connection Blue light flashes...
  • Page 14 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) The device's own battery is used to bridge the short-term disconnection time from an external power source. It is charged during normal operation. Normal operation of the device The device can be operated in the following ways:...
  • Page 15 SIM card. Setting options via the software When using the desktop or mobile application of Flexcom Kft, the setup operations related to tracing can be accessed in the following ways. The settings and commands that can be issued depend on the type of device. See the rest of this guide for information on options for this device.
  • Page 16 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) Select the desired device on the map or in the menu. Click the Settings or Commands button to select the general setting or behavior you want. When using a mobile application: From the application menu, select Map.
  • Page 17 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) Switch to the Tools panel. Find your device in the list of devices and tap the Setup icon next to the ID. Select the desired setting or, when sending a command, select Commands.
  • Page 18 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) General settings Device Function Description SMS message response password<old password> <new password> Example: password123456 876543 Change the factory default Password Change password The password must be a 6-digit Arabic password (123456). number.
  • Page 19 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) Restart the GPS and GSM Restart Restart the device modules of the device. Factory default Reset the device to factory setting settings. format Query the position of the device Description Device response...
  • Page 20: Troubleshooting And Repair

    Flexcom Communication Ltd Installation and operating instructions (2021/03/23) Troubleshooting and repair Conditions for safe use of devices Information for people with long-term health problems or disabilities This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 21 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) Identifying problems and possible solutions Symptom Possible cause Solution The device does not turn on or turns off The battery may be Charge the battery. immediately after turning exhausted. it on. Check the strength of the GSM connection. If the LED is solid amber, there is no connection to the No GSM connection.
  • Page 22 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) During the warranty period, if the conditions of the warranty have not been violated, the distributor will take care of the professional investigation of the cause of the failure, repair of the error or replacement of the device.
  • Page 23 Flexcom Communication Ltd Installation and operating instructions (2021/03/23) Decommissioning Disposing and destroying the device If you decide to stop using the appliance, do not throw it away with the normal household waste. The device is a complex structure and its components contribute to environmental problems to varying degrees.

Table of Contents