Download Print this page

Flexcom TKSTAR TK806 Installation And Operating Instructions Manual

Vehicle tracking device

Advertisement

Quick Links

Flexcom Communication Ltd
Installation and operating instructions (2021/03/29)
Installation and operating instructions
TKSTAR TK806 vehicle tracking device
Introduction
In developing the products we offer, the manufacturers have acted with the utmost care and in
accordance with international standards.
Warranty
We offer a 12-month warranty on the products, which is valid from the date of purchase. Keep the
invoice or block you received at the time of purchase and / or the warranty card of the device,
because you can only enforce your warranty claim if you have them. During the warranty period, we
will replace any defective main unit, accessory or software of the product in the event of any defect
attributable to a manufacturing, material or software defect. Subsequent repairs to the device or its
accessories are not permitted by the manufacturer due to the design of the device.
The warranty does not cover a product (or accessory) that has been damaged or rendered inoperable
due to attempts to modify or repair the software, physical impact, poor voltage, improper use.
To ensure proper, effective and safe use of the product, read the instruction manual carefully and
keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product
damage, short-term or long-term health damage that may occur as a result of use, repair, storage
and transport other than those described in this manual.
Rights, trademarks
© 2019, Flexcom Kommunikációs Kft.
All rights reserved. No part of our printed or online publications may be reproduced, distributed or
transmitted in any form or by any means, including photocopying, recording or other electronic and
mechanical methods, without the prior written permission of the publisher. To obtain a permit,
contact your dealer:
Contact
1/26

Advertisement

loading

Summary of Contents for Flexcom TKSTAR TK806

  • Page 1 To ensure proper, effective and safe use of the product, read the instruction manual carefully and keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product damage, short-term or long-term health damage that may occur as a result of use, repair, storage and transport other than those described in this manual.
  • Page 2 Mobile 2: +36 70 3333 527 Phone service: (Monday-Thursday) 9.00–15.00 Every effort has been made to ensure that the information in our documents is accurate. Flexcom Kommunikációs Kft. Is not responsible for typographical errors and misspellings. Flexcom GPS Tracking Solutions, GPS Positioning System, Nyomkovetes.net is a registered trademark and domain name of Flexcom Kommunikációs Kft.
  • Page 3 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Formats and notations The following style settings are used in descriptions, guides, and other documents: Name of product components, instructions, options, processes, services, user interface Bold text elements. Italic text Links to other publications, emphasis.
  • Page 4: Product Description

    Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Product Description The device combines several functions of accurate positioning, safety, monitoring, emergency alarms and full tracking. It supports SMS / GPRS / Internet data transfer functions and can be widely used in many areas of location-based services, traffic safety and management.
  • Page 5: How To Use

    Flexcom Communication Ltd Installation and operating instructions (2021/03/29) How to use After inserting a SIM card and setting up via SMS or a mobile phone or PC application, the device is connected to the vehicle's electrical system. After switching on, the GPS receiver and the SIM card automatically connect to the GPS and GSM networks (if available) and start collecting position data, which can be queried using SMS or an internet application.
  • Page 6 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) 6/26...
  • Page 7: Technical Parameters

    Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Technical parameters Physical characteristics Parameter Value Dimensions (mm) W: 27, L: 77, H: 15 Weight (g) Humidity from 5% to 95% (none condensing) Water resistance IP65 Operating temperature from -20C to +55C...
  • Page 8 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Parameter Value GSM antenna Internal GPS antenna Internal Analog input Digital input Digital output (relay) 8/26...
  • Page 9 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) User's guide Transport and storage The packaging is designed to protect the product from the usual physical effects during transport. Be careful to avoid effects other than these. The packaging of the product is not water, flame and heat resistant and only moderately pressure resistant.
  • Page 10 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) 1 db jármű csatlakozó kábel 1 relay connection cable 1 double-sided adhesive sheet for fixed fixing 1 installation instructions Preparing the SIM card As with mobile phones, a SIM card is required to operate the device. The device communicates with the mobile service provider's network via SIM card, SMS or mobile phone or PC applications.
  • Page 11 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Insert the SIM card in your phone. Among the setting functions of the phone turn off the PIN code request, auto-reply and call forwarding options. After turning off the above, insert the card into the tracking device. See the next section for instructions on how to insert the SIM card.
  • Page 12 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Steps: Open the cover of the SIM card slot. Insert the card into the slot. The device turns on and the LED lights up when the card is inserted. Be sure to insert the card in the correct position.
  • Page 13 For Android phones Open the Google Play app on your phone. Search for „Flexcom” or „Flexcom tracking” on Google Play. Install the tracking application. Scan the QR code shown here with your phone. Open the web address decoded from this.
  • Page 14 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Using the product User Interface The device does not have a traditional user interface (eg on / off button). An LED indicator informs the user about its operation and status. In addition, only the charger connector, the SIM card slot and a carrying strap can be connected on its surface.
  • Page 15 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) temporary disconnection of the vehicle. When connected to a vehicle, the battery is charged, and if disconnected, it can be charged using a phone charger and a USB cable. A cable with a micro type USB connector can be used to charge the device.
  • Page 16 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) The service provider provides a SIM card for the tracking device only if you subscribe to the software service. In the case of unsolicited use of the software, the user must provide the appropriate card with a data traffic limit (also).
  • Page 17 SIM card. Setting options via the software When using the desktop or mobile application of Flexcom Kft, the setup operations related to tracing can be accessed in the following ways. The settings and commands that can be issued depend on the type of device. See the rest of this guide for information on options for this device.
  • Page 18 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) From the application menu, select Map. Switch to the Tools panel. Find your device in the list of devices and tap the Setup icon next to the ID. 18/26...
  • Page 19 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Select the desired setting or, when sending a command, select Commands. Control the device with SMS commands sent from a mobile phone The factory-set access password for the tracking device in the commands: 123456...
  • Page 20 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) The device's default time timezone123456 value (where value zone is set to GMT + 0. e.g. +1, -2, 0 etc). This is changed (eg in the Set time zone Time Ok case of Hungary, the time Például: timezone123456 +1 (Hungarian...
  • Page 21 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Activate: stop123456 Once activated, the device Once the device is connected to the will block the vehicle until vehicle, you have the option of the following unlock command Stop Ok, Resume stopping it remotely and preventing it...
  • Page 22 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Turning on: acc123456 The device sends an alarm to the Content of the alarm message: ACC set Ok or phone when the vehicle is started. ACC on!” Noacc set ok Turning off: noacc123456...
  • Page 23: Troubleshooting And Repair

    Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Troubleshooting and repair Conditions for safe use of devices Information for people with long-term health problems or disabilities This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 24 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Identifying problems and possible solutions Symptom Possible cause Solution The device does not turn on or turns off The battery may be Charge the battery. immediately after turning exhausted. it on. Check the strength of the GSM connection. If the LED is solid amber, there is no connection to the No GSM connection.
  • Page 25 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) During the warranty period, if the conditions of the warranty have not been violated, the distributor will take care of the professional investigation of the cause of the failure, repair of the error or replacement of the device.
  • Page 26 Flexcom Communication Ltd Installation and operating instructions (2021/03/29) Decommissioning Disposing and destroying the device If you decide to stop using the appliance, do not throw it away with the normal household waste. The device is a complex structure and its components contribute to environmental problems to varying degrees.