Download Print this page
Flexcom LK209S Installation And Operating Instructions Manual

Flexcom LK209S Installation And Operating Instructions Manual

Vehicle, person, package, boat tracker device

Advertisement

Quick Links

Flexcom Communication Ltd
Installation and operating instructions (2021/06/09)
Installation and operating instructions
LK209S vehicle, person, package, boat tracker device
Introduction
In developing the products we offer, the manufacturers have acted with the utmost care and in
accordance with international standards.
Warranty
We offer a 12-month warranty on the products, which is valid from the date of purchase. Keep the
invoice or block you received at the time of purchase and / or the warranty card of the device,
because you can only enforce your warranty claim if you have them. During the warranty period, we
will replace any defective main unit, accessory or software of the product in the event of any defect
attributable to a manufacturing, material or software defect. Subsequent repairs to the device or its
accessories are not permitted by the manufacturer due to the design of the device.
The warranty does not cover a product (or accessory) that has been damaged or rendered inoperable
due to attempts to modify or repair the software, physical impact, poor voltage, improper use.
To ensure proper, effective and safe use of the product, read the instruction manual carefully and
keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product
damage, short-term or long-term health damage that may occur as a result of use, repair, storage
and transport other than those described in this manual.
Rights, trademarks
© 2019, Flexcom Kommunikációs Kft.
All rights reserved. No part of our printed or online publications may be reproduced, distributed or
transmitted in any form or by any means, including photocopying, recording or other electronic and
mechanical methods, without the prior written permission of the publisher. To obtain a permit,
contact your dealer:
Contact
1/26

Advertisement

loading

Summary of Contents for Flexcom LK209S

  • Page 1 To ensure proper, effective and safe use of the product, read the instruction manual carefully and keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product damage, short-term or long-term health damage that may occur as a result of use, repair, storage and transport other than those described in this manual.
  • Page 2 Mobile 2: +36 70 3333 527 Phone service: (Monday-Thursday) 9.00–15.00 Every effort has been made to ensure that the information in our documents is accurate. Flexcom Kommunikációs Kft. Is not responsible for typographical errors and misspellings. Flexcom GPS Tracking Solutions, GPS Positioning System, Nyomkovetes.net is a registered trademark and domain name of Flexcom Kommunikációs Kft.
  • Page 3 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) Formats and notations The following style settings are used in descriptions, guides, and other documents: Name of product components, instructions, options, processes, services, user interface Bold text elements. Italic text Links to other publications, emphasis.
  • Page 4: Product Description

    Flexcom Communication Ltd Installation and operating instructions (2021/06/09) Product Description The device combines several functions of accurate positioning, safety, monitoring, emergency alarms and full tracking. It supports SMS / GPRS / Internet data transfer functions and can be widely used in many areas of location-based services, traffic safety and management.
  • Page 5: How To Use

    Flexcom Communication Ltd Installation and operating instructions (2021/06/09) How to use The device can be used after inserting a SIM card, inserting it in a car and then setting it up via SMS or a mobile phone or PC application. Once turned on, the GPS receiver and SIM card will automatically connect to the GPS and GSM networks (if available) and begin collecting position data, which can be queried using SMS or an Internet application.
  • Page 6 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) 6/26...
  • Page 7: Technical Parameters

    Flexcom Communication Ltd Installation and operating instructions (2021/06/09) Technical parameters Physical characteristics Parameter Value Dimensions (mm) W: 65, L: 120, H: 50 Weight (g) Humidity from 5% to 95% (none condensing) Water resistance IP65 Operating temperature from -20C to +55C...
  • Page 8 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) Interface Parameter Value GSM antenna Internal GPS antenna Internal Built-in microphone 8/26...
  • Page 9 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) User's guide Transport and storage The packaging is designed to protect the product from the usual physical effects during transport. Be careful to avoid effects other than these. The packaging of the product is not water, flame and heat resistant and only moderately pressure resistant.
  • Page 10 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) 1 charger 1 installation instructions Preparing the SIM card As with mobile phones, a SIM card is required to operate the device. The device communicates with the mobile service provider's network via SIM card, SMS or mobile phone or PC applications.
  • Page 11 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) service provided by your dealer, you must activate GPRS (Internet) data traffic and enter the appropriate network settings. To do this, you need to send SMS messages from your phone to the phone number of the SIM card inserted in the tracking device, as shown in the table below.
  • Page 12 For Android phones Open the Google Play app on your phone. Search for „Flexcom” or „Flexcom tracking” on Google Play. Install the tracking application. Scan the QR code shown here with your phone. Open the web address decoded from this.
  • Page 13 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) Using the product User Interface The connectors and controls on the device are located at both ends. 13/26...
  • Page 14 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) LED display statuses Signal Meaning Green light flashes slowly (two every two seconds) Searching for GSM / GPRS connection Green light stays on No GSM / GPRS connection No green light Device error or sleep mode Blue light flashes slowly (two every two seconds)
  • Page 15 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) Removal sensor After turning on and positioning the device, the removal sensor button is pressed and activated after 15 seconds. If the device is then removed or dropped, an SMS message will be sent to the admin phone.
  • Page 16 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) With Distributor Software and SIM Card In this case, you can receive the device in the ready state, no further settings are required to use it. Separate software is available for setting or adjusting the operating parameters of the device, for retrieving information or for using more advanced services (eg map route display, waiting and travel points, diagrams, timetable, etc.).
  • Page 17 SIM card. Setting options via the software When using the desktop or mobile application of Flexcom Kft, the setup operations related to tracing can be accessed in the following ways. The settings and commands that can be issued depend on the type of device. See the rest of this guide for information on options for this device.
  • Page 18 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) From the application menu, select Map. Switch to the Tools panel. Find your device in the list of devices and tap the Setup icon next to the ID. 18/26...
  • Page 19 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) Select the desired setting or, when sending a command, select Commands. Control the device with SMS commands sent from a mobile phone The factory-set access password for the tracking device in the commands: 123456...
  • Page 20 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) The device default time timezone123456 value (where value: zone is set to GMT + 0. érték pl. +1, -2, This is changed (eg in the 0 etc.). Setting time zone Time Ok...
  • Page 21 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) Interception of the environment (sound monitoring) After switching on, it becomes possible to „listen” to the sounds and noises in the vicinity of the device. In eavesdropping mode, position transmission is paused, so we cannot track the device during this period.
  • Page 22 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) Speed alarm Description SMS message Device response Turning on: speed123456 You can set the device to send an SMS sebességhatár alert if the vehicle speed exceeds the specified limit. The speed limit must be...
  • Page 23: Troubleshooting And Repair

    Flexcom Communication Ltd Installation and operating instructions (2021/06/09) Troubleshooting and repair Conditions for safe use of devices Information for people with long-term health problems or disabilities This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 24 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) Identifying problems and possible solutions Symptom Possible cause Solution The device does not turn on or turns off The battery may be Charge the battery. immediately after turning exhausted. it on. Check the strength of the GSM connection. If the LED is solid amber, there is no connection to the No GSM connection.
  • Page 25 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) During the warranty period, if the conditions of the warranty have not been violated, the distributor will take care of the professional investigation of the cause of the failure, repair of the error or replacement of the device.
  • Page 26 Flexcom Communication Ltd Installation and operating instructions (2021/06/09) Decommissioning Disposing and destroying the device If you decide to stop using the appliance, do not throw it away with the normal household waste. The device is a complex structure and its components contribute to environmental problems to varying degrees.