Flexcom Reachfar V20 Installation And Operating Instructions Manual

Flexcom Reachfar V20 Installation And Operating Instructions Manual

Vehicle tracker device

Advertisement

Quick Links

Flexcom Communication Ltd
Installation and operating instructions (2021/03/24)
Installation and operating instructions
Reachfar V20 vehicle tracker device
Introduction
In developing the products we offer, the manufacturers have acted with the utmost care and in
accordance with international standards.
Warranty
We offer a 12-month warranty on the products, which is valid from the date of purchase. Keep the
invoice or block you received at the time of purchase and / or the warranty card of the device,
because you can only enforce your warranty claim if you have them. During the warranty period, we
will replace any defective main unit, accessory or software of the product in the event of any defect
attributable to a manufacturing, material or software defect. Subsequent repairs to the device or its
accessories are not permitted by the manufacturer due to the design of the device.
The warranty does not cover a product (or accessory) that has been damaged or rendered inoperable
due to attempts to modify or repair the software, physical impact, poor voltage, improper use.
To ensure proper, effective and safe use of the product, read the instruction manual carefully and
keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product
damage, short-term or long-term health damage that may occur as a result of use, repair, storage
and transport other than those described in this manual.
Rights, trademarks
© 2019, Flexcom Kommunikációs Kft.
All rights reserved. No part of our printed or online publications may be reproduced, distributed or
transmitted in any form or by any means, including photocopying, recording or other electronic and
mechanical methods, without the prior written permission of the publisher. To obtain a permit,
contact your dealer:
Contact
1/25

Advertisement

Table of Contents
loading

Summary of Contents for Flexcom Reachfar V20

  • Page 1 To ensure proper, effective and safe use of the product, read the instruction manual carefully and keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product damage, short-term or long-term health damage that may occur as a result of use, repair, storage and transport other than those described in this manual.
  • Page 2 Mobile 2: +36 70 3333 527 Phone service: (Monday-Thursday) 9.00–15.00 Every effort has been made to ensure that the information in our documents is accurate. Flexcom Kommunikációs Kft. Is not responsible for typographical errors and misspellings. Flexcom GPS Tracking Solutions, GPS Positioning System, Nyomkovetes.net is a registered trademark and domain name of Flexcom Kommunikációs Kft.
  • Page 3 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Formats and notations The following style settings are used in descriptions, guides, and other documents: Name of product components, instructions, options, processes, services, user interface Bold text elements. Italic text Links to other publications, emphasis.
  • Page 4: Product Description

    Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Product Description The device combines several functions of accurate positioning, safety, monitoring, emergency alarms and full tracking. It supports SMS / GPRS / Internet data transfer functions, it can be widely used in the field of location-based services and personal security.
  • Page 5: How To Use

    Flexcom Communication Ltd Installation and operating instructions (2021/03/24) How to use You can use the device after charging, inserting the SIM card, and setting it up via SMS or a mobile phone or PC application. The device automatically connects to the GPS and GSM networks using the GPS receiver and the SIM card (if available) and starts collecting position data, which can be queried using SMS or an Internet application.
  • Page 6 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) 6/25...
  • Page 7: Technical Parameters

    Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Technical parameters Physical characteristics Parameter Value Dimensions (mm) W: 51, L: 122, H: 25 Weight (g) Humidity from 5% to 95% (none condensing) Water resistance Not waterproof Memory Parameter Value Built-in SD card...
  • Page 8 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Interface Parameter Value GSM antenna Belső GPS antenna Internal Built-in microphone Built-in speaker Built-in lamp 8/25...
  • Page 9: Transport And Storage

    Flexcom Communication Ltd Installation and operating instructions (2021/03/24) User's guide Transport and storage The packaging is designed to protect the product from the usual physical effects during transport. Be careful to avoid effects other than these. The packaging of the product is not water, flame and heat resistant and only moderately pressure resistant.
  • Page 10 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Preparing the SIM card As with mobile phones, a SIM card is required to operate the device. The device communicates with the mobile service provider's network via SIM card, SMS or mobile phone or PC applications.
  • Page 11 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) lowercase letters in SMS messages and do not leave spaces anywhere! Device Setting response apn,apn-name,user,<username>,pd,<password># APN names for domestic service providers: Telenor: online or net Telekom: internet Setting Vodafone: - in case of subscription: internet.vodafone.net - in the case of a top-up card: vitamax.internet.vodafone.net...
  • Page 12 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Charging the battery The device has a built-in battery that can be charged via the USB port. Your phone charger is suitable for charging, but you can also use the USB connection of a computer or energy bank.
  • Page 13 For Android phones Open the Google Play app on your phone. Search for “Flexcom” or “Flexcom tracking” on Google Play. Install the tracking application. Scan the QR code shown here with your phone. Open the web address decoded from this.
  • Page 14 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Using the product User Interface The connectors and controls of the device are located at both ends, under a protective cover, and on one side of the microphone. (1) Lamp (2) SIM slot (3) Microphon (4) On / off...
  • Page 15: Turning Off

    Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Blue GPS connection Searching Successful Yellow GSM connection Searching Successful Turning on and off You can switch the device on and off with the power key. Turning on If it is not already inside, insert the SIM card in the device.
  • Page 16 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) lamp Powerbank The device can be used as an energy bank to charge other devices (eg mobile phones). Plug the included USB cable into the power bank output, connect the devices to be charged to the appropriate cable ends.
  • Page 17 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Alarms Different alarm functions can be set on the device for different types of events. When the event occurs, the device sends an SMS message to the administrator's phone number, or you can also sound beeps on your speaker.
  • Page 18 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Tracking Position query When the GPRS mode is on, you can query the current position of your device. To do this: Send the following command via SMS to the phone number of the device's SIM card: url# The device sends the position data (latitude, longitude) in a reply SMS.
  • Page 19 - by sending SMS messages from your mobile phone to the phone number of the device's SIM card. Setting options via the software When using the desktop or mobile application of Flexcom Kft, the setup operations related to tracing can be accessed in the following ways. 19/25...
  • Page 20 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) The settings and commands that can be issued depend on the type of device. See the rest of this guide for information on options for this device. When using a desktop application: Select the desired device on the map or in the menu.
  • Page 21 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Switch to the Tools panel. Find your device in the list of devices and tap the Setup icon next to the ID. Select the desired setting or, when sending a command, select Commands.
  • Page 22: Troubleshooting And Repair

    Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Troubleshooting and repair Conditions for safe use of devices Information for people with long-term health problems or disabilities This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 23 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Identifying problems and possible solutions Symptom Possible cause Solution The device does not turn on or turns off The battery may be Charge the battery. immediately after turning exhausted. it on. Check the strength of the GSM connection. If the LED is solid amber, there is no connection to the No GSM connection.
  • Page 24 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) During the warranty period, if the conditions of the warranty have not been violated, the distributor will take care of the professional investigation of the cause of the failure, repair of the error or replacement of the device.
  • Page 25 Flexcom Communication Ltd Installation and operating instructions (2021/03/24) Decommissioning Disposing and destroying the device If you decide to stop using the appliance, do not throw it away with the normal household waste. The device is a complex structure and its components contribute to environmental problems to varying degrees.

Table of Contents