Download Print this page

Flexcom TK108A Installation And Operating Instructions Manual

Advertisement

Quick Links

Flexcom Communication Ltd
Installation and operating instructions (2021/02/25)
Installation and operating instructions
TK108A car gps tracker
Introduction
In developing the products we offer, the manufacturers have acted with the utmost care and in
accordance with international standards.
Warranty
We offer a 12-month warranty on the products, which is valid from the date of purchase. Keep the
invoice or block you received at the time of purchase and / or the warranty card of the device,
because you can only enforce your warranty claim if you have them. During the warranty period, we
will replace any defective main unit, accessory or software of the product in the event of any defect
attributable to a manufacturing, material or software defect. Subsequent repairs to the device or its
accessories are not permitted by the manufacturer due to the design of the device.
The warranty does not cover a product (or accessory) that has been damaged or rendered inoperable
due to attempts to modify or repair the software, physical impact, poor voltage, improper use.
To ensure proper, effective and safe use of the product, read the instruction manual carefully and
keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product
damage, short-term or long-term health damage that may occur as a result of use, repair, storage
and transport other than those described in this manual.
Rights, trademarks
© 2019, Flexcom Kommunikációs Kft.
All rights reserved. No part of our printed or online publications may be reproduced, distributed or
transmitted in any form or by any means, including photocopying, recording or other electronic and
mechanical methods, without the prior written permission of the publisher. To obtain a permit,
contact your dealer:
Contact
1/27

Advertisement

loading

Summary of Contents for Flexcom TK108A

  • Page 1 To ensure proper, effective and safe use of the product, read the instruction manual carefully and keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product damage, short-term or long-term health damage that may occur as a result of use, repair, storage and transport other than those described in this manual.
  • Page 2 Mobile 2: +36 70 3333 527 Phone service: (Monday-Thursday) 9.00–15.00 Every effort has been made to ensure that the information in our documents is accurate. Flexcom Kommunikációs Kft. Is not responsible for typographical errors and misspellings. Flexcom GPS Tracking Solutions, GPS Positioning System, Nyomkovetes.net is a registered trademark and domain name of Flexcom Kommunikációs Kft.
  • Page 3 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) Formats and notations The following style settings are used in descriptions, guides, and other documents: Name of product components, instructions, options, processes, services, user interface Bold text elements. Italic text Links to other publications, emphasis.
  • Page 4: Product Description

    Flexcom Communication Ltd Installation and operating instructions (2021/02/25) Product Description The device combines several functions of accurate positioning, safety, monitoring, emergency alarms and full tracking. It supports SMS / GPRS / Internet data transfer functions and can be widely used in many areas of location-based services, traffic safety and management.
  • Page 5: How To Use

    Flexcom Communication Ltd Installation and operating instructions (2021/02/25) How to use After inserting a SIM card and setting up via SMS or a mobile phone or PC application, the device is connected to the vehicle's electrical system. Once turned on, the GPS receiver and SIM card will automatically connect to the GPS and GSM networks (if available) and begin collecting position data, which can be queried using SMS or an Internet application.
  • Page 6 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) 6/27...
  • Page 7 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) 7/27...
  • Page 8 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) User's guide Transport and storage The packaging is designed to protect the product from minor physical impacts during transport. Be careful to avoid effects other than these. The packaging of the product is not water, flame and heat resistant and only moderately pressure resistant.
  • Page 9 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) 1 vehicle connection cable 1 installation instructions Preparing the SIM card As with mobile phones, a SIM card is required to operate the device. The device communicates with the mobile service provider's network via SIM card, SMS or mobile phone or PC applications.
  • Page 10 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) appropriate network settings. To do this, you must send SMS messages from your phone to the phone number of the SIM card inserted in the tracking device, as shown in the table below.
  • Page 11 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) Using a pointed tool, press the SIM tray release button. Pull out the SIM tray. Insert the card in the correct position. Push the tray back into place. Installing the device The device must be connected to the vehicle's electrical system.
  • Page 12 For Android phones Open the Google Play app on your phone. Search for “Flexcom” or “Flexcom tracking” on Google Play. Install the tracking application. Scan the QR code shown here with your phone. Open the web address decoded from this.
  • Page 13 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) Install the Flexcom tracking application. For iPhones Use the browser on your phone to access the service (https://gpspositions.net/map/). Use of the product User interface The connectors and controls on the device are located at both ends.
  • Page 14 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) No GSM connection Flashes quickly, one per second Mode: GSM Flashes slowly, once every three seconds Mode: GPRS Off No satellite connection Green Flashes quickly, one per second Connected to a satellite network...
  • Page 15 SIM card. Setting options via software A készülék működtetéséhez a Flexcom Kft saját fejlesztésű nyomkövető szoftvert is biztosít. A működést befolyásoló, a készülék telefonos SMS üzenetek útján elérhető gyári alapfunkcióit lefedő, de egyben azt lényegesen meg is haladó beállítási lehetőségeket a szoftver Beállítások, Parancsok és Riasztások funkciói biztosítják.
  • Page 16 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) leírtak helyett annak a szoftvernek a protokollját kell figyelembe vennie! A Flexcom Kft asztali vagy mobiltelefonos alkalmazásának használata esetén a nyomkövetéssel kapcsolatos beállítási műveletek az alábbi módokon érhetők el. Asztali alkalmazás használata esetén: Válassza ki a kívánt készüléket a...
  • Page 17 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) Váltson át az Eszközök panelre. Keresse meg az eszközök listájában a készüléket és koppintson az azonosító mellett levő Beállítás ikonra. Válassza ki a kívánt beállítást vagy parancs küldése esetén a Parancsok menüpontot.
  • Page 18 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) General settings Device Function Description SMS message response Factory default setting Reset the device to factory settings. begin123456 Begin Ok password<old password> <new password> Change password Change the factory default password (123456).
  • Page 19 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) A készülék XXX Send position data at másodpercenként YYY specified intervals, darab pozíció üzenetet fixXXXs***n123456 Position without quantity küld. Az XXX data limit. időintervallum minimum For example: fix030s***n123456 20 másodperc lehet. The device can be set to...
  • Page 20 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) the device can be set to stop the vehicle only when its speed is below 20 km / h. Send the noquickstop123456 setting SMS to the device. This activates the general setting, which will result in the next message sent in step 2 causing or not to stop the vehicle depending on its speed.
  • Page 21 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) Turning on: gpssignal123456 You can set the device to send an alert to the administrator phones if the Content of the alarm message: satellite connection is lost. The alarm is „No gps <vehicle position>”.
  • Page 22 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) Description SMS message Device response If the fuel consumption while driving exceeds the normal level or the oil level is low after stopping the engine, the device sends the message oil: Turning on: oil123456...
  • Page 23 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) To set the sensitivity, send the following in advance SMS message to the device: **sensitivity123456 X** where - X = 1 (alarm even in case of weak effect) - X = 2 (alarm only in case...
  • Page 24: Troubleshooting And Repair

    Flexcom Communication Ltd Installation and operating instructions (2021/02/25) Troubleshooting and repair Conditions for safe use of devices Information for people with long-term health problems or disabilities This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 25 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) Identifying problems and possible solutions Symptom Possible cause Solution The device does not turn on or turns off The battery may be Charge the battery. immediately after turning exhausted. it on. Check the strength of the GSM connection. If the LED is solid amber, there is no connection to the No GSM connection.
  • Page 26 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) During the warranty period, if the conditions of the warranty have not been violated, the distributor will take care of the professional investigation of the cause of the failure, repair of the error or replacement of the device.
  • Page 27 Flexcom Communication Ltd Installation and operating instructions (2021/02/25) Decommissioning Disposing and destroying the device If you decide to stop using the appliance, do not throw it away with the normal household waste. The device is a complex structure and its components contribute to environmental problems to varying degrees.