Assembly - Char-Broil 463210311 Product Manual

ASSEMBLY

Place legs as shown．NOTE：Left leg assembly has large holes on ends of legs. Attach center brace， left front and left rear
1
leg with 1/4-20x1/2" screws，7mm Flat Washer and 7mm Lock Washer on each side．
Attach upper brace， left leg assembly which was assembled previously with 1/4-20x1/2" screws，7mm Flat Washer
and 7mm Lock Washer on each side．Note orientation of Upper Braces as shown in image．
The assembly method of right leg assembly is similar to left leg assembly．
Qty: 12
1/4-20x1/2"
Machine Screw
Qty: 12
7mm Flat Washer
Qty: 12
7mm Lock Washer
Place bottom shelf with cut out hole for LP cylinder next to legs with axle holes.
2
Attach to right and left leg assemblies with 1/4-20x1/2" screws， 7mm Flat Washer and
7mm Lock Washer on each side.
Qty: 4
1/4-20x1/2"
Machine Screw
Qty: 4
Flat
7mm Washer
Qty: 4
Lock
7mm Washer
Upper Brace,
Left Cart
Center Brace
Left Rear Leg
Upper Brace,
Right Cart
Right Rear Leg
Left Front Leg
Right Front Leg
17