Attach upper and lower front panel to cart with 1/4-20x1/2" screws, 7mm Flat Washer and
ASSEMBLY
3
7mm Lock Washer on each side.
Attach upper front panel to lower front panel with #10-24x1/2" screws and #10-24 hex nuts.
Qty:
8
1/4-20x1/2"
Machine Screw
Machine Screw
Qty: 8
7mm Flat Washer
Qty: 8
Lock
7mm
Washer
Qty: 2
#10-24 Hex Nut
Turn assembly upside down.
4
Insert axle rod into wheel, axle spacer, legs and other
Push leg extenders into right legs.
Attach back brace to cart with 1/4-20x1/2" screws,
7mm Flat Washer and 7mm Lock Washer on each side.
Qty. 1
Qty: 4
1" Hitch Pin
7mm Flat Washer
Qty: 4
Qty:1
7mm
Lock
Axle Washer
"Cone" side of wheel against leg
Qty: 4
1/4-20x1/2"
Machine Screw
18
Qty:
2
#10-24x1/2"
Axle
Spacer
Qty: 2
Washer
axle spacer and wheel,
Attach with (1) axle washer and hitch pin.
Wheel
Axle Rod
Axle Spacer
Leg Extenders
Axle Washer
Hitch Pin
Back Brace