Repeat step 8(A)on left side shelf.
11
Tighten the pre-installed screws to the left side shelf (B)
Attach left side shelf to firebox with 1/4-20x1/2" screws on the upper holes.Attach left fascia to control panel with #10-24x1/2" screws.
Position valve behind fascia and line up holes (C).
Insert (1) of the #8-32x3/8" screws, but do not fully tighten. Slip bezel under inserted screw and position as shown (C).
Line up other hole and insert (1) #8-32x3/8"
Unscrew the hardware's from sideburner. Place sideburner into shelf (D). Make sure to insert valve into sideburner tube. Attach
sideburner to drip pan with the screws and lock washers unscrewed from sideburner just now.
Attach sideburner ignitor wire to electrode as shown (E ).
Qty: 2
1/4-20x1/2"
Machine Screw
Machine Screw
Qty: 3
#10-24 Hex Nut
D
22
Place left side shelf to the left side of firebox
Qty:
5
Qty:
2
#10-24x1/2"
#8-32x3/8"
Machine Screw
B
Sideburner
Sideburner Valve
.
screw through bezel and into valve. Tighten both securely.
Sideburner Ignitor Wire
(A)
.
A
C
Control Knob Bezel
Sideburner Valve
E
Valve