Xantrex 884-0310-12-01 Owner's Manual
Hide thumbs Also See for 884-0310-12-01:

Advertisement

Quick Links

Owner's Guide
Xantrex 310Ah 12V Battery
Xantrex Lithium-ion Battery
PN: 884-0310-12-01 | 884-0310-12
Xantrex 410Ah 12V Battery
PN: 884-0410-12-01 | 884-0410-12
Xantrex 205Ah 24V Battery
PN: 884-0205-24-01 | 884-0205-24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 884-0310-12-01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Xantrex 884-0310-12-01

  • Page 1 Owner's Guide Xantrex 310Ah 12V Battery Xantrex Lithium-ion Battery PN: 884-0310-12-01 | 884-0310-12 Xantrex 410Ah 12V Battery PN: 884-0410-12-01 | 884-0410-12 Xantrex 205Ah 24V Battery PN: 884-0205-24-01 | 884-0205-24...
  • Page 2 CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE VERSION WHICH IS POSTED AT http://www.xantrex.com. NOTE: Visit http://www.xantrex.com , click Products, select a Product category, select a Product, and search the Product Documents panel for a translation of the English guide, if available.
  • Page 3 The guide provides safety and operating guidelines as well as information on installing and configuring the lithium-ion battery Related Information using the Xantrex App. You can find more information about Xantrex products and services at http://www.xantrex.com. Audience The guide is intended for qualified personnel.
  • Page 4: Important Safety Information

    FLASH c An example of an arc flash event could be a direct short circuit caused This guide contains important safety instructions for the Xantrex by a metallic object such as a tool bridging between the positive and Battery that must be followed during installing, operating, negative of an energized circuit.
  • Page 5: Regulatory Information

    Charge the battery module with an approved charger. generates, uses, and can radiate radio frequency energy and, if Contact Xantrex for details. not installed and used in accordance with the instructions, may Do not charge the battery above the recommended cause harmful interference to radio communications.
  • Page 6: Table Of Contents

    Pre-service Checklist Troubleshooting Interpreting Ring LED Patterns on the Battery Battery Maintenance Guideline Battery Storage Guidelines Storage Instructions for Short Durations Storage and Maintenance Instructions for Long Durations Specifications Electrical and Physical Specifications Regulatory Approvals Xantrex Lithium-ion Battery Owner's Guide...
  • Page 7: Materials List

    Battery Pack Rebling connector POWER SYSTEM NOTE: If any of the items are missing, contact Xantrex or any authorized Xantrex dealer for replacement. This guide provides instructions on how to safely install, IMPORTANT: Keep the carton and packing material in case operate, and maintain your Xantrex battery system.
  • Page 8: Installation Tools And Materials

    Installation Tools and Materials Installation Tools and Materials You will need the following to install the Xantrex Battery: Torque wrench Multimeter Wire stripper Crimping tool IMPORTANT: A torque wrench is required for correct installation of the batteries. A proper torque of 60±3 in-lb (or 6.7±0.35 N-m) is required for correct installation.
  • Page 9: Pre-Installation Checklist

    This equipment contains components that tend to produce arcs or sparks. Do not cover or obstruct the ventilation openings. Do not install the Xantrex Battery in a zero-clearance compartment. Overheating may result. Failure to follow these instructions can result in death, serious injury, or equipment damage.
  • Page 10: 3.0 Mounting The Battery

    ANSI-RVIA LV standard clause 2-3. Figure 4 Approved Orientations NOTICE GENERAL PRECAUTION Do not mount the Xantrex Battery in an area subject to high vibration or physical shock. Failure to follow these instructions may reduce the life of the battery.
  • Page 11: 4.0 Placing The Battery Safely

    4.0 Placing the Battery Safely 4.0 Placing the Battery Safely 5.0 Installing DC Protections Position the battery and devices that will connect to the battery for the Battery in a way that the battery cables avoid sharp bends. Follow the Battery protection devices such as properly rated DC fuses, bend radius recommendation below.
  • Page 12: Connecting The Battery Cables

    Reversing the positive and negative battery cables will key assembly which contains the battery terminals. blow a fuse in the Xantrex Battery and void your warranty. NOTE: The cable-mounted keyable plug doubles as a protective Failure to follow these instructions can result in equipment boot that securely attaches the battery cables as an assembly to damage.
  • Page 13: Parallel Installation

    Parallel Installation This section provides instructions for installing two to four batteries in parallel to increase power capacity for robust applications in your RV, truck, or vessel. This sections contains the following topics: Parallel Installation Steps 975-1044-01-01...
  • Page 14: Parallel Installation Steps

    0.05VDC of each other at the point of connection. This procedure helps ensure that there is minimal current flow and sparking between batteries. Note that you can also use the Xantrex App to provide a reading of SoC information.
  • Page 15 Parallel Installation Steps 6. Then connect the battery positive cable from the second Rebling connector to the common positive bus. NOTE: If more than two batteries are being connected, ensure a consistent connection method is used for connecting the batteries. 7.
  • Page 16 This page is intentionally left blank. [1]...
  • Page 17: Communication Installation

    The pins should only be connected to devices on an as-needed used in vehicle systems providing additional performance and basis. The Xantrex Battery will function without having the usage scenarios. These functions need to be connected through communication ports externally connected to the battery.
  • Page 18 2 has (control of enabled the alternator this pin shall produce a control voltage) signal that is compatible with Xantrex Alternators. Brown Contactor Output High signal when contactor is closed state/Aux output...
  • Page 19: Operation

    The battery has a built in BLE (Bluetooth Low Energy ) module for basic communication and troubleshooting with the battery. The BLE module app (the Xantrex App) can be found by scanning the QR code on the battery or searching for "Xantrex App"...
  • Page 20 (+) Value is recharge. Batt. The temperature of the cells inside of the battery. The Xantrex App will highlight any event that is detected in the Temp battery or the BMS. The alert will also display a suggestion for correcting the detected event.
  • Page 21: Bms Operations

    ON -> M AINTENANCE You will hear an audible click as the main contactor disconnects. The Xantrex Battery can operate up to 133 °F (55° C) while Must wait for at least 15 seconds after the battery was put into -> ON mode before the battery will accept input. Press the button for...
  • Page 22 A maximum of 14.6VDC at the battery terminals is required. Providing a 12VDC power source to pin 12 will also wake the battery. Xantrex Lithium-ion Battery Owner's Guide...
  • Page 23: Troubleshooting And Maintenance

    Troubleshooting and Maintenance This section will help you narrow down the source of any problem you encounter. Before contacting customer service, please work through the steps listed in Pre-service Checklist on page 24. This section includes: Pre-service Checklist Troubleshooting Interpreting Ring LED Patterns on the Battery Battery Maintenance Guideline Battery Storage Guidelines Storage Instructions for Short Durations...
  • Page 24: Pre-Service Checklist

    Pre-service Checklist WARNING ELECTRICAL SHOCK OR BURN HAZARD Do not disassemble the Xantrex Battery. It does not contain any user-serviceable parts. Attempting to service the Xantrex Battery yourself could result in an electrical shock or burn. Failure to follow these instructions can result in death, serious injury, or equipment damage.
  • Page 25: Troubleshooting

    An internal battery cell is over discharged. Disconnect all loads connected to the power system. Check your charging source and be sure to use an approved charging source such as a Xantrex charger or inverter/charger. Connect an external charging source to the battery and turn the battery ON. It should receive a small amount of charge to begin recovering the battery.
  • Page 26 Battery does not turn on with the pushbutton Apply a voltage of 14.6VDC to the battery terminals for at least 3 seconds. If the battery still does not turn on, contact technical support. Xantrex Lithium-ion Battery Owner's Guide...
  • Page 27: Interpreting Ring Led Patterns On The Battery

    Battery voltage too low event The battery has been over discharged. Charge the battery and check the Low Voltage Disconnect setting on the Xantrex charger or inverter/charger or the SOC gauge, if available. If the error persists, contact technical support.
  • Page 28: Battery Maintenance Guideline

    Battery Storage Guidelines In order to keep your Xantrex Lithium-ion Battery at peak performance and at its healthiest state, you have to store it according to proper storage conditions and also maintain it with proper care. Storage can be short term, such as less than one month or long term, such as more than six months.
  • Page 29: Specifications

    Specifications Electrical and Physical Specifications Regulatory Approvals 975-1044-01-01...
  • Page 30: Electrical And Physical Specifications

    * Current rating at 25 °C. Current rating of 150A only at the maximum temperature of 55 °C. Table 4 Product dimensions Regulatory Approvals Battery LiFePO Certified Cells: File MH61463; Model GBS-LFP100Ah-E Safety ANSI/CAN/UL STD 1973, ETL Control Number 5026209 (For Battery Models with Product Number: 884-0310-12-01, 884-0410- 12-01) Xantrex Lithium-ion Battery Owner's Guide...
  • Page 31 +1-800-670-0707 +1-408-987-6030 975-1044-01-01 Rev H Printed in: 31159...

Table of Contents