Advertisement
Table of Contents
Lithionics Battery
Xantrex SW3012 Programming Guide
Rev. 0 ©2017 Lithionics Battery
DESCRIPTION: The scope of this document is to provide tested and approved settings for the Xantrex
SW3012 using a Lithionics Battery 12.8V LiFePO4 battery system. Firmware version "3.08.00 BN 9" must be
used which was specifically developed with Xantrex for the SW3012 to work with the more powerful and
much lower internal resistance Lithionics Battery products. Please refer to the SW3012 Owners Guide for
further information on how to install and operate your SW3012 especially the section "Configuring the
Freedom SW using the SCP" Page 33.
LITHIONICS BATTERY, CLEARWATER, FL 33759 USA
PH: 727.726.4204 | FAX: 727.797.8046 | WEB: LITHIONICSBATTERY.COM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Xantrex SW3012
Summary of Contents for Xantrex SW3012
- Page 1 SW3012 using a Lithionics Battery 12.8V LiFePO4 battery system. Firmware version “3.08.00 BN 9" must be used which was specifically developed with Xantrex for the SW3012 to work with the more powerful and much lower internal resistance Lithionics Battery products. Please refer to the SW3012 Owners Guide for further information on how to install and operate your SW3012 especially the section “Configuring the...
- Page 2 Disabled this can be set lower between 11.2V – 12.0V which will allow a lower depth of discharge. ** Do NOT use the Xantrex battery temperature sensor as it is not needed with the Lithionics Battery LiFePO4 battery system. *** This is the recommended setting but should be adjusted depending on the installation site’s intended usage pattern.
Need help?
Do you have a question about the SW3012 and is the answer not in the manual?
Questions and answers