Subscribe to Our Youtube Channel
Related Manuals for Xantrex 883-0105-12
Summary of Contents for Xantrex 883-0105-12
- Page 1 Owner's Guide Xantrex 105Ah 12V Battery Xantrex Lithium-ion Battery PN: 883-0105-12 Xantrex 125Ah 12V Battery PN: 883-0125-12...
- Page 2 CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE VERSION WHICH IS POSTED AT http://www.xantrex.com. NOTE: Visit http://www.xantrex.com , click Products, select a Product category, select a Product, and search the Product Documents panel for a translation of the English guide, if available.
- Page 3 The guide provides safety and operating guidelines as well as information on installing and configuring the lithium-ion battery Related Information using the Xantrex App. You can find more information about Xantrex products and services at http://www.xantrex.com. Audience The guide is intended for qualified personnel.
-
Page 4: Important Safety Information
WARNING Please Note HAZARD OF FIRE, ELECTRIC SHOCK, EXPLOSION, No responsibility is assumed by Xantrex for any consequences AND PERSONAL INJURY arising out of the use of this material. Do not expose the Li-ion battery to rain, snow, or liquids of any type. -
Page 5: Regulatory Information
Charge the battery module with an approved charger. generates, uses, and can radiate radio frequency energy and, if Contact Xantrex for details. not installed and used in accordance with the instructions, may Do not charge the battery above the recommended cause harmful interference to radio communications. -
Page 6: Table Of Contents
Pre-service Checklist Troubleshooting Interpreting LED Indicators on the Battery and Remote Battery Maintenance Guideline Battery Storage Guidelines Storage Instructions for Short Durations Storage and Maintenance Instructions for Long Durations Specifications Electrical and Physical Specifications Regulatory Approvals Xantrex Lithium-ion Battery Owner's Guide... -
Page 7: Materials List
2x Lock Washer 2x captive washer This guide provides instructions on how to safely install, NOTE: If any of the items are missing, contact Xantrex or any operate, and maintain your Xantrex battery system. authorized Xantrex dealer for replacement. Materials List IMPORTANT: Keep the carton and packing material in case you need to return the lithium-ion battery for servicing. -
Page 8: Installation Tools And Materials
The American Boat and Yacht Council (ABYC) standards and US Coast Guard Regulations (33CFR183, Sub Part I) for Marine installations in the U.S. It is the installer’s responsibility to ensure that all applicable installation requirements are met. Xantrex Lithium-ion Battery Owner's Guide... -
Page 9: Pre-Installation Checklist
2.0 Choosing a Location for the Battery 3.0 Mounting the Battery 4.0 Placing the Battery Safely IMPORTANT: Contact Xantrex Technical Support immediately 5.0 Installing DC Protections for the Battery if you see visible damages to the battery at +1-800-670-0707 or 6.0 Connecting the Battery Cables... -
Page 10: Mounting The Battery
Figure 4 Approved Orientations NOTICE GENERAL PRECAUTION Do not mount the Xantex Battery in an area subject to high vibration or physical shock. Failure to follow these instructions may reduce the life of the battery. Xantrex Lithium-ion Battery Owner's Guide... -
Page 11: Placing The Battery Safely
4.0 Placing the Battery Safely 4.0 Placing the Battery Safely 5.0 Installing DC Protections Position the battery and devices that will connect to the battery for the Battery in a way that the battery cables avoid sharp bends. Follow the Battery protection devices such as properly rated DC fuses, bend radius recommendation below. -
Page 12: Connecting The Battery Cables
(supplied) captive washer (supplied) cable ring lug battery terminal DC cable with heat shrink insulation covering the lug stem NOTE: The battery cable lug stem must be fully insulated with the heat shrink. Xantrex Lithium-ion Battery Owner's Guide... -
Page 13: Parallel Installation
This procedure helps ensure that there is minimal current flow and sparking between batteries. Note that you can also use the Xantrex App to provide a reading of SoC information. Nevertheless, a voltage measurement using a multimeter must be taken to ensure there is as little voltage between the terminals as possible. - Page 14 85–95 in-lb (10–11 Nm) of force. Loose connections will overheat. Too much torque may crack the battery case. Failure to follow these instructions can result in death, serious injury, or equipment damage. Xantrex Lithium-ion Battery Owner's Guide...
-
Page 15: Communication Installation
Deutsch Connector Pin Designations Deutsch Connector Pin Communication Installation Designations This section contains instructions for other functions that can be used in vehicle systems providing additional performance and usage scenarios. These functions need to be connected through the 4-Pin Deutsch connector. This sections contains the following topics: Deutsch Connector Pin Designations Communication Connector Pin Designations... -
Page 16: Communication Connector Pin Designations
Function Description The Remote On/Off harness is available using product code Remote Wired in parallel to the switch on the battery case. (PN: 881-0267-12). Contact Xantrex or your Xantrex dealer to On/Off (Power) order. Remote Wired in parallel to the switch on the battery case. -
Page 17: Operation
The battery has a built in BLE (Bluetooth Low Energy ) module for basic communication and troubleshooting with the battery. The BLE module app (the Xantrex App) can be found by scanning the QR code on the battery or searching for "Xantrex App"... - Page 18 (+) Value is recharge. Batt. The temperature of the cells inside of the battery. The Xantrex App will highlight any event that is detected in the Temp battery or the BMS. The alert will also display a suggestion for correcting the detected event.
- Page 19 OFF | flashing at 2 Hz A more precise number for SoC can be seen by downloading the Xantrex App and remotely connecting to the battery by Bluetooth. A general SoC % gauge will be on the monitor page of each battery.
-
Page 20: Bms Operations
BMS Operations BMS Operations Power Button The Xantrex Lithium-ion Battery has a Power button on the unit that turns the state of the battery to either ON or OFF. c Keep the battery ON after successfully mounting and integrating it into a power system except when storing, moving, or shipping it. -
Page 21: Troubleshooting And Maintenance
Troubleshooting and Maintenance This section will help you narrow down the source of any problem you encounter. Before contacting customer service, please work through the steps listed in Pre-service Checklist on page 22. This section includes: Pre-service Checklist Troubleshooting Interpreting LED Indicators on the Battery and Remote 25 Battery Maintenance Guideline Battery Storage Guidelines Storage Instructions for Short Durations... -
Page 22: Pre-Service Checklist
Prior to obtaining service, see below: 1. Check for any error codes or alert conditions displayed on the Xantrex App. If available, check the SoC gauge (PN: 881-0268-01) for error codes. 2. As soon as possible, record the conditions at the time the problem occurred so you can provide details when you contact customer service for help. -
Page 23: Troubleshooting
An internal battery cell is over discharged. Disconnect all loads connected to the power system. Check your charging source and be sure to use an approved charging source such as a Xantrex charger or inverter/charger. Connect an external charging source to the battery and turn the battery ON. It should receive a small amount of charge to begin recovering the battery. - Page 24 BMS temperature is too high during charge or The battery is too hot to operate correctly during its cycle. discharge Decrease the ambient heat in the immediate battery environment, if possible. Or check for other environmental causes and safely remove the cause. Xantrex Lithium-ion Battery Owner's Guide...
-
Page 25: Interpreting Led Indicators On The Battery And Remote
Battery Storage Guidelines In order to keep your Xantrex Lithium-ion Battery at peak performance and at its healthiest state, you have to store it according to proper storage conditions and also maintain it with proper care. -
Page 26: Specifications
Specifications Electrical and Physical Specifications Regulatory Approvals Xantrex Lithium-ion Battery Owner's Guide... -
Page 27: Electrical And Physical Specifications
Electrical and Physical Specifications Electrical and Physical Specifications Table 6 Specifications Feature 883-0105-12 883-0125-12 Nominal Capacity 105Ah 125Ah Nominal Voltage 12.8V 12.8V Nominal Energy 1344Wh 1600Wh Charging Voltage (max) 14.6V 14.6V Float Voltage 13.4V 13.4V Low Battery Cutoff Voltage 10.0V 10.0V Recommended Charge Current 62.5A... -
Page 28: Regulatory Approvals
Regulatory Approvals Regulatory Approvals Transportation UN / DOT 38.3 successfully tested, rated Class 9, Lithium-Ion Battery, UN3480 Safety Battery LiFePO cells are UL 1973 Recognized Components Xantrex Lithium-ion Battery Owner's Guide... - Page 29 +1-800-670-0707 +1-408-987-6030 975-1042-01-01 Rev D Printed in: 31156...
Need help?
Do you have a question about the 883-0105-12 and is the answer not in the manual?
Questions and answers