Table of Contents
Advertisement
Quick Links
HAZARD OF FIRE, ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
This Xantrex 125Ah Battery with BMS Owner's Guide is in addition to, and incorporates by reference, the relevant product manuals for each
product in the power system. After reviewing this guide you must read the relevant product manuals. Unless specified, information on safety,
specifications, installation, and operation is as shown in the primary documentation received with the product. Ensure you are familiar with that
information before proceeding.
Failure to follow these instructions will result in death or serious injury.
Exclusion for Documentation
UNLESS SPECIFICALLY AGREED TO IN WRITING, SELLER (A) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR
SUITABILITY OF ANY TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION; (B)
ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES, WHETHER SPECIAL, DIRECT,
INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY
SUCH INFORMATION WILL BE ENTIRELY AT THE USER'S RISK; AND (C) REMINDS YOU THAT IF THIS MANUAL IS IN ANY
LANGUAGE OTHER THAN ENGLISH, ALTHOUGH STEPS HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION,
THE ACCURACY CANNOT BE GUARANTEED. APPROVED CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE VERSION
WHICH IS POSTED AT HTTP://WWW.XANTREX.COM.
Contact Information
Telephone:
+1-800-670-0707 / +1-408-987-6030
Email:
customerservice@xantrex.com,
http://www.xantrex.com/power-products-support/
Web:
http://www.xantrex.com
Copyright © 2020 Xantrex LLC. All Rights Reserved.
All trademarks are owned by Xantrex LLC and its affiliates.
Owner's Guide
125Ah Battery with Integrated
Battery Management System
880-0125-12
880-0125-12-01
880-0125-12-02
DANGER
880-0125-12-03
880-0125-12-04
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Xantrex 880-0125-12
Summary of Contents for Xantrex 880-0125-12
- Page 1 HAZARD OF FIRE, ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH This Xantrex 125Ah Battery with BMS Owner's Guide is in addition to, and incorporates by reference, the relevant product manuals for each product in the power system. After reviewing this guide you must read the relevant product manuals. Unless specified, information on safety, specifications, installation, and operation is as shown in the primary documentation received with the product.
-
Page 2: Table Of Contents
Contents Important Safety Information Introduction Installation Operation Power Button and LED Indicator Remote Panel Battery Charging Low Battery Recovery Troubleshooting Specifications Battery Disposal 975-0824-01-01 Rev A February 2020... -
Page 3: Important Safety Information
• Installing and configuring lithium-ion batteries • Selecting and using Personal Protective Equipment (PPE) No responsibility is assumed by Xantrex LLC for any consequences arising out of the use of this material. DANGER HAZARD OF FIRE, ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH •... - Page 4 • Do not alter the factory settings on any of the system devices including the BMS. • Do not disassemble the Xantrex Battery or the BMS. They contain non-serviceable parts. • Only charge the Xantrex Battery with an approved charger. Contact Xantrex for details.
-
Page 5: Introduction
You may download the Xantrex Battery app from Google Play or the App Store. The battery also features a 10% Reserve Voltage. This 10% reserve can be activated by a single press of the Power button, if necessary. -
Page 6: Installation
Installation NOTICE RISK OF EQUIPMENT DAMAGE • Do not connect multiple batteries in series. Parallel connection is permitted. • The battery must be installed upright with the cable/terminal side up. Failureto followtheseinstructionscan result in damageto equipment and mayvoid thewarranty. 1. Check the battery for visible damage including cracks, dents, and deformations on the body. - Page 7 5. Attach the neg(–) battery cable to the neg(–) battery power terminal. See the illustration below for proper stacking of terminal connections. Torque terminal bolt to 106 in-lb (12 N-m). 6. Install a DC fuse and fuse holder on a short battery cable that will be used for the positive side of the DC circuit.
- Page 8 NOTICE REVERSE POLARITY DAMAGE Check cable polarity before making the final DC connection. Positive must be connected to positive; negative must be connected to negative. Reversing the positive and negative battery cables may damage the battery and void your warranty. Failureto followtheseinstructionscan result in death,seriousinjury,orequipment damage.
-
Page 9: Operation
Operation Power Button and LED Indicator The Xantrex 125Ah Battery has an LED indicator integrated into the Power button on the unit itself. Power button for On/Off/Alarm The LED is off when the unit is turned off and battery power is disabled. -
Page 10: Remote Panel
Remote Panel The Xantrex 125Ah Battery has a remote panel port next to the Power button on the unit. Remote Panel device Connects to a compatible battery. REMOTE It is used to turn the battery on and off. It is equipped with LEDs that mimic the behavior of the LED on the battery. -
Page 11: Battery Charging
Battery Charging When the battery’s SoC is greater than 10% and while battery power is still engaged, you may charge the battery by engaging power from the charging source. When SoC is less than 10% but greater than 3%, and the reserve shutdown event has occurred, press the Power button on the unit. -
Page 12: Low Battery Recovery
Low Battery Recovery NOTICE RISK OF BATTERY DAMAGE Turn off (or disconnect) all loads completely before performing a Low Battery Recovery procedure. Failure to follow these instructions can result in damage to battery. When SoC is less than 3% and the low voltage shutdown event has occured, charge the battery immediately through a charging source. -
Page 13: Troubleshooting
Troubleshooting PROBLEM CAUSE SOLUTION Battery is turned Battery is low (reserve Follow the steps in Battery Charging and charge the shutdown). battery immediately. Battery is critically low (low Follow the steps in Low Battery Recovery and charge voltage shutdown). the battery immediately. The battery will Battery temperature is Apply proper ventilation and make sure ambient... -
Page 14: Specifications
Specifications NOTE: Specifications are subject to change without prior notice. 12.8VDC Electrical Nominal Voltage Overview 125Ah Nominal Capacity ≤4mΩ Internal Resistance 318 x 165 x 215mm (12.52 x 6.5 x 8.46in) Physical L x W x H Features 15.1Kg (33.4lbs) Weight Reserve Power, High and Low Voltage Cutoff, High and Low Temperature Cutoff, Short Major Circuit Protection, Bluetooth App Support, Features... - Page 15 -20 – 55 °C (-4 – 131 °F) Temperature range Discharging Features 11.2 to 14.6 V Output voltage ≤80A (recommended) Discharge current 100A with starting temp of 77°F (25°C) Max discharge current (continuous) <400A for 30s max with starting temp of 77°F Surge discharge current (25°C) <1000A for 1s max with starting temp of 77°F...
-
Page 16: Battery Disposal
Battery Disposal At the end of the battery’s useful life, proper disposal is required. Do not dispose the battery with ordinary household waste. Refer to your local codes for proper disposal of lithium-ion batteries. DANGER HAZARD OF FIRE, ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Upon disposal, do not crush, puncture, drop, disassemble, dispose of in fire, or similar actions.
Need help?
Do you have a question about the 880-0125-12 and is the answer not in the manual?
Questions and answers