Xantrex 783-0100-01 Owner's Manual

Xantrex Solar Portable Kit
http://www.xantrex.com
100W Xantrex Solar Portable Flex Kit
Model Number: 783-0100-01
100W Xantrex Solar Portable Kit
Model Number: 782-0100-01
160W Xantrex Solar Portable Kit
Model Number: 782-0160-01
NOTE: Actual product may be different from what is shown.
Portable Flex Kit
[100W Xantrex Solar Portable Flex Kit shown]
Owner's Guide
975-0809-01-01 Rev B
January 2019
Copyright © 2019 Xantrex LLC. All Rights Reserved.
Trademarks are owned by Xantrex LLC and its affiliates. All other trademarks are owned
by their respective companies.
Exclusion for Documentation
UNLESS SPECIFICALLY AGREED TO IN WRITING, SELLER
(A) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY
TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION;
(B) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES,
WHETHER SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE
OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE
ENTIRELY AT THE USER'S RISK; AND
(C) REMINDS YOU THAT IF THIS MANUAL IS IN ANY LANGUAGE OTHER THAN ENGLISH, ALTHOUGH
STEPS HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION, THE ACCURACY
CANNOT BE GUARANTEED. APPROVED CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE
VERSION WHICH IS POSTED AT http://www.xantrex.com.
Contact Information
Telephone: +1-800-670-0707 / +1-408-987-6030
Email: customerservice@xantrex.com,
http://www.xantrex.com/power-products-support/
Web: http://www.xantrex.com
© 2019 Trademarks are owned by Xantrex LLC and its affiliates. All other trademarks are owned by
their respective companies.
Safety Information
Important Information
O ' G
READ AND SAVE THIS WNER S UIDE FOR FUTURE REFERENCE
Read these instructions carefully and look at the equipment to become familiar with the
device before installing, operating, configuring, maintaining, and troubleshooting it. The
following special messages may appear throughout this documentation or on the
equipment to warn of potential hazards or to call attention to information that clarifies or
simplifies a procedure.
The addition of either symbol to a "Danger" or "Warning" safety label
indicates that an electrical hazard exists which will result in personal
injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
.