ProKlima A018A-09C-PLUS-W Operating Instructions Manual page 18

DB/WB(℃)
Check up whether the exhaust hose has been mounted properly.
Cautions for cooling and dehumidifying operations:
When using functions on cooling and dehumidifying, keep an interval of at least 3 minutes
between each ON/OFF.
Power supply meets the requirements.
The socket is for AC use.
Do not share one socket with other appliances.
Power supply is AC220--240V，50Hz
6.2 Cooling operation
Press the "Mode" button till the "Cool" icon appears.
Press the " DOWN "or" UP "button to select a desired room temperature. (16℃-31℃)
Press the " SPEED " button to select wind speed.
6.3 Dehumidifying operation
Press the "Mode" button till the "Dehumidify" icon appears .
Automatically set the selected temperature to current room temperature minus 2℃. (16℃-31℃)
Automatically set the fan motor to LOW wind speed.
6.4 Fan operation
Press the "Mode" button till the "Fan" icon appears.
Press the " SPEED " button to select wind speed.
6.5 Timer operation
Timer ON setting:
When the air-conditioner is OFF, press the "Timer" button and select a desired ON time through the
temperature and time setting buttons.
"Preset ON Time" is displayed on the operation panel.
ON time can be regulated at any time in 0-24 hours.
Press the "Timer " button again to confirm, Timer indicator turns on.
To deactivate the timer function, press"Timer " button until timer indicator turns off.
Timer OFF setting
When the air-conditioner ON, press "Timer" button and select a desired OFF time through the
temperature and time setting buttons.
"Preset OFF Time" is displayed on the operation panel.
OFF time can be regulated at any time in 0-24 hours.
Press the "Timer " button again to confirm, Timer indicator turns on.
To deactivate the timer function, press"Timer " button until timer indicator turns off.
6.6 Auto SWING
After machine turns on, press this key, the louver will swing continuously up and down; by pressing this
button again the movement will stop and the louver remain in that position.
6.7 SLEEP mode
While in cooling mode, press the SLEEP key to set the temperature. It increases1 ℃ after an hour and at
most increases 2 ℃ after 2 hours.
Maximum cooling
35/24
18
Minimum cooling
18/12
EN