Ariens Sno-Thro 926 Service Manual page 32

INSTALLING THE ENGINE
1. Position the engine in the frame.
15.Insert mounting bolts and tighten.
16.If equipped with electric starting, install the starter. On models with 12V starter (926500, 501) connect the
positive lead from the solinoid to the starter.
17.Reattach any brackets for chute/deflector controls.
18.Install pulleys on engine shaft. Do not tighten set screws.
19.Install belts. Adjust the engine pulleys to align with attachment and drive pulleys. Tighten set screws.
GB - 34