Ariens Sno-Thro 926 Service Manual page 31

See your engine manual for information on the operation and maintenance of your engine. Follow those instruc-
tions for oil and filter changes.
REMOVING THE ENGINE
1. Drain gasoline.
11.Remove both belts from the engine pulleys. Remove pulleys.
12.If the unit has a bracket at the top of the engine for chute/deflector controls, unbolt it.
13.If the unit is equipped with electric starting, remove the starter. On models with 12V starter (926500, 501)
disconnect negitive cable from battery, remove starter cable and ground cable from starter.
14.Remove the four mounting bolts from the engine base.
GB - 33