Traffic Sign Assist - Tsa - Maserati GranTurismo Owner's Manual

WARNING!
Many unforeseen conditions can occur
that can affect the performance of
Active Driving Assist (ADA). Always
keep this in mind and drive attentively.
Be prepared to take over control of the
vehicle immediately at any time.
System in Faulty
The ADA system cannot properly
operate due to a fault of its components,
or because the components themselves
or their detection area is obstructed.
In these cases the amber warning
light and the related message will be
displayed on the instrument cluster.
In this condition avoid using the system
and have the vehicle inspected at the
Service Network.
Radar Device - Regulatory
Information
The "Regulatory Information" for all
the radio frequency and radar devices
can be consulted by accessing the
section "Services" on the website
www.maserati.com.
Traffic Sign Assist – TSA
( )
TSA detects traffic signs through the
use of a forward-facing digital camera
mounted on windshield, behind the rear-
view mirror and assists the driver by
displaying detected speed limits and
overtaking restrictions in the instrument
cluster. The camera also detects traffic
signs with a restriction indicated by an
additional sign (e.g. in snow conditions).
TSA also uses data of navigation system
to retrieve the speed limits when the
camera is not able to detect the road
where the car is travelling.
Some examples of these are: due to low
visibility, light reflection, damaged traffic
signs, traffic signs in wrong position like
rotated or fallen poles.
NOTE:
• Overtaking restriction sign will be
displayed only in markets where this is
allowed.
• TSA provides a visual warning + chime
to the driver when he/she reaches the
speed limit plus the set "Sensitivity"
value (+0, +5, +10) depending on the
signal tolerance of the indicated speed.
• The performance of TSA does not
depend on the update degree of
navigation system's maps.
Driving and Driver Assistance Systems
• TSA is enabled when in CORSA drive
mode.
Customised Settings
TSA is configurable by the customer
regarding the display mode on the MIA
screen and the warning sensitivity.
Entering "Vehicle" page on MIA display
and select the "Traffic Sign Assist" soft-
key of the "Settings" menu to enter the
setting page.
The check mark on the "Warning Mode"
box can be set in "Off", "Visual" and
"Visual + Chime".
The display of the traffic signs can be
blinking or static.
Signs Monitoring on Instrument
Cluster
If TSA function is set and a sign or a
speed limit is detected, the related
icons are displayed in the upper area
of the instrument cluster beside the
digital speedometer or they can be
visualized even on the Head Up Display,
if activated.
The display area is divided in two
different sectors:
1 No Overtaking + Conditional Unverified
Speed Limit area
2 Unconditioned Speed Limit or
Conditional Verified Speed Limit +
arrows up/down
5
261