Maserati GranTurismo Owner's Manual page 236

Driving and Driver Assistance Systems
To turn the system off, push the
ON/OFF button a second time. The
white light will turn off.
WARNING!
5
Never leave the Cruise Control
system on when not in use. You could
accidentally set the system or cause it
to go faster than you want. Always
leave the system off when you are not
using it.
Speed Range of Use
Speed
Minimum
Engaged/activated
Maximum
Setting Desired Speed
Turn on the CC function. When the
vehicle has reached the desired speed
234
(in the example: 100 km/h), push
downward the multifunction switch (SET
-) and release.
The green light with beside the
desired speed will illuminate on the
cluster display.
Release the accelerator and the vehicle
will operate at the selected speed.
NOTE:
The vehicle should be travelling at a
steady speed and on level ground before
pushing the button (SET-).
Pressing the
km/h (mph)
moving the ignition device in STOP
position erases the set speed memory.
30 (20)
Changing Speed Setting
30 (20)
Pushing the button (SET +) or (SET -)
210 (130)
once will enable to increase or decrease
the set speed by one unit (1 km/h or 1
mph). If the car is equipped with ADAS
Systems, the short press of the button
will increase or decrease the set speed
of 1 km/h or 1 mph; a long pressure of
the same will increase or decrease the
set speed of 10 km/h or 5 mph.
Release the button when the desired
speed is reached, and the new set speed
will be visualized beside the green light.
Each subsequent tap of the multifunction
switch will increase or decrease the
speed by 1 km/h or 1 mph.
Temporary Deactivation
A soft tap on the brake pedal, pressing
the button (CANC), or normal brake
pressure while slowing the vehicle will
temporarily deactivate the CC without
erasing the set speed memory. The
white light with beside the set speed will
appear on the cluster display.
"ON/OFF" button or
Driver Override
If the driver presses the accelerator
pedal while the CC is on, such as to
overtake another vehicle, and exceeds