Adjusting The Machine Head - JUKI SADE Operating Instructions Manual

6.11 Adjusting the machine head

68
Industrial Sewing Machine SADE
switch ❹ and switch ❺, turn
1) Simultaneously pressing
ON the power switch.
2) is displayed
indicator and the mode is
changed over to the adjust-
ment mode.
3) Turn the pulley of the machine
head by hand until the main-
shaft reference signal is de-
tected. At this time, the de-
gree of an angle from the
main-shaft reference signal is
displayed on the indicator
(The value is the reference
value.)
marker dots ❼ on the pulley
4) In this state, align one of the
with marker line ❽ on the
pulley cover as shown in the
figure.
5) Press switch ❻ to finish the
adjustment work. (The value
is the reference value.)
6) Turn the power OFF.
in the
.