Table of Contents
Advertisement
Industrial Sewing Machine SADE
The standard plug of the pedal is changed.
WARNING!
The SC922 control unit will accept normal speed regulator pedals. The sewing ma-
chine can run outside the production cycle. The product cycle will still be monitored
and only valid products will receive a traceability barcode label.
An immediate shutdown of the machine in the emergency is possible by releasing the
pedal switch.
Computer and peripherals
Fig. 11. Computer
The computer on the JUKI SADE serves two purposes:
1. Interface between operator and machine;
2. Production data management.
Great effort has been made to keep the configuration and functionality of the computer
similar to standard desktop PC's. To keep pace with continues development of hard-
ware components like processors and adapters we've used industrial components. As
from the beginning, we've implemented a real industrial PC as standard because of uni-
formity and spare part availability.
Software protection key
Sade is the dedicated software for the JUKI SADE workstation. The software is copy-
protected and will not run without a corresponding software protection key reading the
hard drive serial number and creating a special access code. During installation time 3
different codes used and an *.ini file is created. This *.ini file can be updated remotely.
This enables to release software options at a later stage.
36
Advertisement
Table of Contents
