Pacer Functional Overview - Nektar Pacer User Manual

Pacer Functional Overview

Preset Switch
Press and hold for 2 seconds, then select a preset using the switches,
by first selecting bank A/B/C/D followed by preset number 1-6.
[Preset] is also the back button when navigating Pacer menus.
Power On/Off
6 Nektar Pacer User Guide
Cable Tie
Tie your USB or PSU cable.
Unscrew with screwdriver and
tighten again for secure fit.
Power Supply
Power supply socket (PSU
optional) 9v 600mA, center
negative, 2.1mm barrel con-
nector.
Switches A-D
In factory presets, assignments for these 4 swiches are A: Track prese
preset, D: Load next preset. Each of the switches can be configured to
MIDI Output Jack
Connect external MIDI equipment.
Can be used as USB MIDI interface as
well as for direct control - or both.
USB Connector
Connect to USB host/computer.
Unit powered via USB.
Footswitch s
2 TRS 1/4" jack s
of up to 4 extern
Expression Pedal sockets 1 & 2
Standard expression pedals can be con-
nected for additional real-time control.
www.nektartech.com