Table of Contents
Advertisement
Connection and Power
Pacer is USB class compliant. That means there is no driver to install - it just needs to be plugged in.
Pacer uses the built-in USB MIDI driver class driver which is already part of your operating system on Windows and OS X.
The first steps are simple:
•
Locate the included USB cable and plug one end into your computer and the other into the Pacer's USB socket on the rear panel.
•
If you want to connect additional foot switches plug them into the 1/4" jack socket on the back of the keyboard labeled "FS". Pacer will
automatically detect the polarity of the foot switch. You can connect up to 4 foot switches but will need additional Y-spliter or insert
cables to access all of them.
•
Set the power switch on the back of the unit to On
Your computer will now spend a few moments identifying the Pacer and subsequently you will be able to set it up for your DAW.
Nektar DAW Integration Files for Pacer
If your DAW is supported by Nektar DAW integration software , you'll need to first create a user account on our website and subsequently
register your product to gain access to the downloadable files applicable to your product.
Start by creating a Nektar user account here:
Next follow the instructions given to register your product and finally click on the "My Downloads" tab to access your files.
IMPORTANT: Make sure to read the installation instructions in the PDF guide, included in the downloaded package, to ensure you don't
miss an important step.
www.nektartech.com
www.nektartech.com/registration
Nektar Pacer User Guide
5
Advertisement
Table of Contents
