Table of Contents
Advertisement
Type
Move the [Data Encoder] until you see „TYPE" in the display. Type is the menu where you specify what kind of message or action the select-
ed step will send or execute.
•
Press [Data Encoder] to select the menu. The type setting for the currently selected step is displayed in the display (for example CC
TOG or PGBNK etc).
•
The selected step is illuminated red. Press any other switch illuminated white to select a different step.
•
Move the [Data Encoder] to select the type you need for the current step (see chart below).
•
Press [Data Encoder] when you are done. The display now reads „TYPE" which means you are back at the top menu level.
Type Data Settings
The type selelected for the current step determines what options are available. The chart below shows the types available as well as the
setting options for each in column's Data 1-3 as well as MIDI Channel if applicable.
Type
MIDI CC Toggle
MIDI CC Trigger
MIDI CC Step
MIDI Note
MIDI Note Toggle
MIDI Program & Bank
MIDI Program Step
MIDI NRPN Coarse
MIDI NRPN Fine
MIDI Machine Control
Pacer Relay Outputs
Pacer Preset
Pacer Preset Inc/Dec
Control Step Select
Control Step Inc/Dec
Nektar DAW Control
Off
Example:
•
With type set to MIDI CC Trigger (CCTRG) for the current step, move the [Data Encoder].
•
When the display reads "CC", press the [Data Encoder].
•
Move the [Data Encoder] to select the MIDI CC number from 0-127, you want the step to send.
•
Press [Data Encoder] and move it to "DWN".
•
Press [Data Encoder] and set the Down value by moving the [Data Encoder]. This is the value sent when the control is pressed.
•
Press [Data Encoder] and move it to "UP".
•
Press the [Data Encoder] and set the Up value by moving the [Data Encoder. This is the value sent when the control is released.
•
Press the [Data Encoder] to accept this last change.
www.nektartech.com
Display Abb.
Data 1
CCTOG
MIDI CC (0-127)
CCTRG
MIDI CC (0-127)
CCSTP
MIDI CC (0-127)
NT
Note (0-127)
NTTOG
Note (0-127)
PGBNK
Program (0-127)
PGSTP
Start (0-127)
NRPNC
Value (0-127)
NRPNF
Value (0-127)
MMC
Device ID (0-127)
RELAY
Mode (nO/nC/Lt)*
PRSET
Target (A1-D6, Trc, Trn)
PR-+
Direction (Inc/Dec)
STEP
Target (A-D, 1-6, FS1-4,
EXP 1-2)
STP-+
Target (A-D, 1-6, FS1-4,
EXP 1-2)
DAW
Function (Solo, mute
etc)
OFF
n/a
Data 2
Data 3
Press 1 (0-127)
Press 2 (0-127)
Down (0-127)
Up (0-127)
Start (0-127)
End (0-127)
Velocity (0-127)
n/a
Velocity (0-127)
n/a
Bank LSB (0-127)
Bank MSB (0-127)
End (0-127)
n/a
LSB (0-127)
MSB (0-127)
LSB (0-127)
MSB (0-127)
Command (0-127)
n/a
Select (1-4)
n/a
n/a
n/a
n/a
n/a
Step (1-6)
n/a
Direction (Inc/Dec)
n/a
n/a
n/a
n/a
n/a
MIDI Channel
0=Global, 1-16
0=Global, 1-16
0=Global, 1-16
0=Global, 1-16
0=Global, 1-16
0=Global, 1-16
0=Global, 1-16
0=Global, 1-16
0=Global, 1-16
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Nektar Pacer User Guide
11
Advertisement
Table of Contents
