Factory Restore
Factory Restore
Restoring to factory settings will revert all settings to the status they were at when you first purchased the unit. Make sure to backup any
presets or settings that you want to retain.
Here are the steps for restoring to factory settings
•
Make sure your Pacer is switched off.
•
Press the [Preset] switch and hold it while switching power on.
•
The display reads "G CFG". Move the [Data Encoder] until it reads "RESET".
•
Press the 'Data Encoder". The reset will activate immediately.
•
Once complete, Pacer reverts to the top level menu.
www.nektartech.com
Nektar Pacer User Guide
19