Job Settings; Network Settings - Makita DFT060T Instruction Manual

Settings menu
The following settings menu options are available in the settings menu window.
Level 1 Level 2
Start menu (start
PIN code menu
screen)
PIN code menu
► Fig.10
1. On the start screen press and hold the right arrow
button to display the PIN code menu.
2. Enter the PIN codes to display the select menu.
NOTE: The default PIN codes are "0000".
Button Action
Press
Press
Press and hold
Press and hold
Select menu
► Fig.11
Select one of the menu options on the screen after you
enter the PIN successfully.
Press the up or down arrow button to scroll the select
menu screen. Then press the right arrow button to
display your preferred settings menu.
Total job settings
* This settings menu is not available for this tool.

Job settings

► Fig.12: 1. Job number you select 2. Total job num-
bers stored in tool memory
Select one of the jobs previously saved in the tool
memory.
Button Action
Press
Press and hold
Level 3
"Total Job" menu
"Manual Mode" menu
Select menu
"History" menu
"Network" menu
"PIN" menu
Application
Change digit position.
Change setting values.
Confirm setting
Return to start screen
Application
Change setting values.
Confirm setting
13 ENGLISH
Level 4
Total job settings
* Not available for this tool
Job settings
History settings

Network settings

PIN settings
History settings
► Fig.13: 1. Total numbers of screws you have fas-
tened so far since first operation 2. Total
numbers of screws you have fastened after
previous maintenance
Learn your job history.
NOTE: Accumulated maintenance count can be
reset in your accordance in the application software
designed for this tool.
Network settings
► Fig.14
Learn your device identification.
PIN settings
► Fig.15
Renew your PIN codes if the need arises.
Button Action
Press
Press
Press and hold
Press and hold
Application
Change digit position.
Change setting values.
Confirm setting
Return to start screen