Contents Important safety instructions Hearing safety General information 2 Your True wireless earpieces What's in the box Other devices Overview of your True wireless earpieces 3 Get started Charge the battery How to wear Pair the earpieces with your Bluetooth device for the rst time 7 Pair the earpieces with another Bluetooth device 4 Use your earpieces...
1 Important General information safety To avoid damage or malfunction: instructions Caution Do not expose headphones to excessive heat. Do not drop your headphones. Hearing safety Headphones shall not be exposed to dripping or splashing. (Refer to the IP rating of speci c product) ...
Page 4
If the headset is not used for a long time, the rechargeable battery will begin to lose its charge. To avoid this loss, please fully charge the battery at least once every three months. To avoid risk of re, the equipment is supplied only by external power source which output shall comply with PS1 (with output capacity less than 15W).
2 Your True wireless USB-C charging cable (for charging only) earpieces Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips o ers, Quick start guide register your product at www.philips.com/support. With these Philips True wireless earpieces you can: •...
Overview of your True wireless earpieces Multi-function touch (MFT) LED indicator (earpieces) Microphone LED indicator (BT pairing and reset) Bluetooth pair button LED indicator (battery state or charging state) USB-C charging slot...
3 Get started Charging case Plug one end of the USB-C cable into the charging case and the other end Charge the battery into the power source. Note Before you use your headphones, place them in the charging case and charge the battery for 2 hours for optimum battery capacity and lifetime.
How to wear Pair the earpieces with your Bluetooth device for Select suitable ear tips for optimum t the rst time A tight, secure t will provide the best sound quality and noise isolation. Make sure that the earpieces are fully charged and powered o .
Turn on the Bluetooth function of If you want to pair another Bluetooth your Bluetooth device, select device with the earpieces, just put them Philips TAT3217. into pairing mode, (press button on box for 3 seconds with both earpieces inside Enter the earpieces' password and the cover open), then discover the “0000”...
4 Use your Power on/o earpieces Task Multi- Operation function touch Connect the earpieces to Turn the Take earpiec- your Bluetooth device es out of the earpieces on charging case Turn on the Bluetooth function of Put earpieces Turn the your Bluetooth device.
Manage your music and Earpieces LED indicator calls (Mono mode) status Music control Earpieces status Indicator Task Multi- Operation The earpieces are Blue LED blinks function connected to a every 5 seconds touch Bluetooth device Play or L / R Tap and hold The earpieces are The LED ashes...
On your Bluetooth device, go to the 460 mAh on charging case Bluetooth menu and remove Bluetooth version: 5.2 Philips TAT3217 from the device list. Compatible Bluetooth pro les: • HFP (Hands-Free Pro le) Turn o the Bluetooth function of •...
2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an o cial collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate...
if not installed and used in accordance Compliance with EMF with the instruction manual, may cause harmful interference to radio This product complies with all communications. applicable standards and regulations However, there is no guarantee that regarding exposure to electromagnetic interference will not occur in a particular elds.
Page 15
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en...
8 Trademarks Bluetooth The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners.
Bluetooth function of any previously compatible (see ‘Technical data’ on connected Bluetooth devices. page 11). • On your Bluetooth device, delete “Philips TAT3217” from the Bluetooth Clean your headphones regularly. list. • Use a clean, damp cloth to clean •...
Page 18
To avoid this loss, please fully charge the battery at least once every three months. APP DOWNLOAD Scan the QR code/press 'Download' button or search 'Philips Headphones' in Apple App Store or Google Play to download App.
Page 19
Speci cations are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its a liates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.
Need help?
Do you have a question about the 3000 Series and is the answer not in the manual?
Questions and answers