Installation - Philips RUSH SA238 Frequently Asked Questions Manual

Philips sa238: frequently asked question

Hide thumbs Also See for RUSH SA238:

Table of Contents

Installation

How do I insert the battery in my RUSH player?

To insert a battery, lift up the latch at the back of the player to open the battery cover. Remove the

cover to access the battery compartment. Insert an AAA /UM4/LR03 battery or Ni-MH rechargeable

battery correctly according to the polarity as marked in the compartment. Replace the battery cover

back.

(Back to Q1)

How do I hook up my RUSH player with my computer?

For Windows98 users,

software and the driver installation must be completed before any connection. Otherwise your

computer will not recognize the player.

Check that the player is loaded with a suitable or preferably fresh battery before you start

connecting.

Turn on the computer.

Connect the supplied USB cable to your computer's USB port (the larger end of the cable

connects to your computer).

Connect the small end of the USB cable to USB jack on RUSH.

RUSH's display shows READY. This means the connection is successful.

(Back to Q2)

What are the system requirements for RUSH?

You will need a PC

Microsoft Windows98 FE, ME, Windows2000, WindowsXP

Pentium MMX 166MHz processor or better

96MB available RAM

50MB of available hard drive space.

CD ROM drive (for encoding from CD)

USB port

Video display card

Sound card

Microsoft Internet Explorer 5.0, Netscape 4.0 or better, and internet access.

(Back to Q3)

make sure that the RUSH driver is installed in your computer. The

(Always turn on the computer before hooking up the player)

(RUSH does NOT support MAC)

with:

Table of Contents