Install The Philips Songbird Software; Again (After The First Installation); Battery Level Indication; Software Loaded On The Muse - Philips GoGear SA2MUS User Manual

Install the Philips Songbird software

again (after the first installation)
Important!
The Philips Songbird software installer is
preloaded to MUSE.
To free memory capacity for your media
content on MUSE, the installer file is
automatically deleted during the first
installation process.
If you want to install the software any time
after the first installation, follow these
instructions:
1
Connect MUSE to the computer.
2
Ensure that the computer is connected
to the Internet, and then open Windows
Explorer.
3
In Windows Explorer, right click on
MUSE, and then select the option to
install Philips Songbird.
The computer downloads the installer
»
file from the Internet.
4
Follow the on-screen instructions to
complete the installation.
EN
12

Battery level indication

The display indicates the approximate levels of
the battery status as follows:
100% 75% 50%
A flashing battery screen indicates
»
that the battery is low. The player
saves all settings and switches off
within 60 seconds.
Note
•
Rechargeable batteries have a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
•
The charging animation stops and the
icon is displayed when the charging process is
completed.
Tip
•
You can conserve battery power and
increase the play time of MUSE if you go to
> [Display Settings] > [Screen off timer]
and ensure that the shortest timer setting is
selected.
Software loaded on the
MUSE
MUSE comes with the following software:
Philips Songbird (helps you update the
•
firmware of MUSE and transfer your
media files).

Files loaded on the MUSE

The following files are loaded on MUSE:
• User manual
• Frequently asked questions
25% 0%