Philips RUSH SA238 Frequently Asked Questions Manual page 4

A4 How do I install my RUSH player?
The Philips RUSH Audio player supports USB Mass Storage Class.
When you first connect the player to a PC running on WindowsME/2000 or XP via the USB
connector, an application will launch to recognize the player as a USB Mass Storage Class Device.
Your player is detected as New Hardware and will be listed automatically as a Removable Drive
in Windows Explorer, so there is no need for you to actually install a separate driver.
Should you like to use MUSICMATCH to transfer music files to RUSH, insert the installation CD,
select a language on the installation menu and select Yes, install plug-in and MUSICMATCH
jukebox 8.0 to proceed with the installation.
IMPORTANT!
For PCs running on Windows2000, please check if your OS is a Windows2000 Service Pack 3 at
Start Settings
Pack 3 from Microsoft via the URL:
http://www.microsoft.com/windows2000/downloads/servicepacks/sp3/?gssnb=1
For PCs running on
player with PC. Please install your driver by following the steps below:
1. Insert the installation CD into the CD-ROM drive.
2. An application will run automatically in the background checking whether a driver has been
previously installed on your PC. Driver installation for your player will start automatically if no
previous driver is detected. (If the application fails to launch automatically, try opening and
closing the CD-ROM tray to kick-start the application.)
3. On the installation menu, select a language.
4. You will then be prompted with an option whether you want to use MUSICMATCH Jukebox
to transfer between your RUSH player and your PC. (If not, you can skip the option and simply
use Windows Explorer for file transfer.)
5. If you want to use MUSICMATCH Jukebox:
•
Select install MUSICMATCH Jukebox 8.0 with the RUSH plug-in,
•
Select just to install the plug-in if you already have a higher version of MUSICMATCH
Jukebox on your computer.
Once both the driver and MUSICMATCH with the plug-in are installed, you can hook up the player
to start downloading your music files.
(Back to Q4)
A5 How to I insert a memory card into my RUSH player?
1. Lift up the latch at the back of the player to open the battery cover.
2. Insert your external SD or MMC memory card into the CARD INSERT slot.
3. Replace the battery cover back.
(Back to Q5)
A6 When I connect my RUSH player to my computer AFTER installation of
MUSICMATCH & drivers for the first time, my computer finds "New Hardware" and
also prompts for drivers. Where do I find the drivers?
If your computer asks for drivers during your first connection, direct the PC to search in
C:\Program file\Philips\RUSH (64MB) or (128MB).
(Back to Q6)
Control Panel System
Windows98, a separate driver has to be installed BEFORE hooking up the
General. If not, upgrade your OS to Service
or