Philips RUSH SA238 Frequently Asked Questions Manual page 12

Voice memo
A39 How do I make voice recording on RUSH?
Press and hold the MODE button for 1 second and release to switch between modes. Select and
enter the VOICE mode. Press and hold the left ••• key until the display show the voice icon and the
♦ to start recording. The ♦ will flashes when recording is in progress. Press the left ••• key (Stop)
on the joy pad to stop recording.
(Back to Q39)
A40 How do I playback voice files recorded earlier on RUSH?
If the voice icon does not appear, press and hold the MODE button for 1 second and release to
switch between modes. Select and enter the VOICE mode. Scroll down the list with the
to select the voice file which you would like to play. Press the
(Back to Q40)
A41 How come I cannot find some of the voice files recorded earlier on RUSH?
Any voice files with recording time less than 1 second will not be saved by RUSH, please always make
sure that the duration of your voice recording is over 1 second in order to be properly captured.
(Back to Q41)
A42 My RUSH player locks up at the Voice mode.
Download the latest firmware from the http://www.philips.com/support site and upgrade their
RUSH units by following the instructions below:
1. On the http://www.philips.com/support site select Documentation & downloads then
type in the model number.
2. Download the zipped file under Firmware upgrade Software to a temporary directory in
your PC
3. Extract the zipped file
4. Uninstall your existing driver at START
Player
5. Restart your computer.
6. Run the setup.exe application file to reinstall the driver.
7. Click NEXT to continue and YES to accept the terms of use to complete the installation.
8. At Start
9. The computer will prompt you to connect the RUSH player.
10. Remove the battery from the battery compartment of your RUSH player
11. Hook up the player with your PC
12. Press and hold the
holding down the
13. An update screen will pop up, uncheck the QUICK DOWNLOAD box and click START to
upgrade the firmware of your unit.
14. Please take care not to interrupt or unplug the player from computer when the firmware
upgrade is in progress.
15. Once the upgrading process complete, you may click on the removal icon on the task tray to
stop and eject the player,
16. When a message saying the USB device can now be safely removed from the system appears
click OK, the unit should now be able to resume operation.
(Back to Q42)
Uninstall
Programs Philips RUSH Audio player click Recovery.
button WHILE inserting a fresh battery into the player. Continue
button for another 5 seconds
key briefly to start playback.
PROGRAMS Philips RUSH Audio
/ key