Mode 10 (Lcr Function Setting - Panasonic VoiceSonic VB-9411AD Operation, Installation And Programming

MODE 10 (LCR Function Setting)

M
0xxxx#-(0-4)#
LOOK UP TABLE
Set the look-up table so the system knows to select BT
(British Telecom) or any of NCCs when dialling a
particular destination.
0#: BT
1#: NCC1 (Mercury)
2#: NCC2
3#: NCC3
4#: NCC4
Telephone No.
Initial
00000-01425
NCC1
*01426 BT
01427-01458 NCC1
*01459 BT
01460-01892 NCC1
01893 BT
01894-01940
NCC1
*01941
BT
01942-03449
NCC1
*03450-03459
BT
03460-04259 NCC1
04260-04269 BT
04270-04589 NCC1
NOTE : • Multiple Settings Possible.
• Phone Nos. can be set at one setting.
Example: When setting phone Nos. 05000 to 05999.
Enter [0][5][#] (to the 2nd digit). 000 to 999 are
automatically added from the 3rd digit of the
phone No. onwards.
Even when three (or four) digits of the phone No.
are entered, 00 to 99 (or, 0 to 9) are automatically
added from the 4th (or, 5th) digit of the phone No.
onwards.
• Only the BT can be set to phone Nos. marked by an
" * ".
1001#-(0-1)#
LCR FUNCTION
In default programme, the LCR is set to off.
If LCR is required, change programme to enable.
0#: Disable
1#: Enable
Telephone No. Initial
*04590-04599 BT
04600-04999 NCC1
*05000-05009 BT
05010-06449 NCC1
06450-06459 BT
06460-07999 NCC1
*08000-08009 BT
08010-08929 NCC1
*08930-08939 BT
08940-09409 NCC1
09410-09419 BT
09420-09999 NCC1
P-59
PROGRAMMING (MODE 10)
201m#-(Max.
16 digits code)#
AUTHORIZATION CODE (NCC1)
Store the authorization codes supplied by NCC1
(Mercury).
Max. 16 digits
None
202m#-(Max.
16 digits code)#
AUTHORIZATION CODE (NCC2)
Store the authorization codes supplied by NCC2.
Max. 16 digits
None
203m#-(Max.
16 digits code)#
AUTHORIZATION CODE (NCC3)
Store the authorization codes supplied by NCC3.
Max. 16 digits
None
204m#-(Max.
16 digits code)#
AUTHORIZATION CODE (NCC4)
Store the authorization codes supplied by NCC4.
Max. 16 digits
None
211m#-(0 to 2)#
SETTING THE OPTIONAL FEATURES
(NCC1)
The user can select to have a call serial number or
extension number shown for each call on the itemized
NCC1 (Mercury) bill.
Select either facility if desired for each authorization
code.
0#: Not used
1#: Call Serial No.
2#: Internal Itemized Bill (Extension No.)
(m=1-8: Authorization code
type)
(m=1-8: Authorization code
type)
(m=1-8: Authorization code
type)
(m=1-8: Authorization code
type)
(m=1-8: Authorization code
type)