Panasonic VoiceSonic VB-9411AD Operation, Installation And Programming page 140

PROGRAMMING (MODE 4)
(10-25)04#-(0, 1 or 2)#
ANSWER (AUTOMATIC)
Incoming calls assigned to ring can be answered in the
order received by simply picking up the handset or
pressing the ON/OFF key. If you have selected the
"1#" setting, you can make Exchange line calls without
answering incoming calls by pressing the ON/OFF
button. The "2#" selection automatically picks up the
first call. To access a line if the setting is at "0#", you
must pick up the handset and press a Exchange line key.
0#: No automatic pickup
1#: Handset only
2#: Handset and ON/OFF key
(10-25)05#-(0 or 1)#
AUTOMATIC ANSWER WITHOUT
RINGER
The telephone set to "Does not ring" in the Ring Setting
(MODE 5) can answer an incoming call within the same
paging group. However, it is impossible to set the
telephone to answer when it has been set to "No (0#)"
for (10-25)04# in the MODE 4.
To set the telephone to answer or not:
0#: Does not answer
1#: Answers
(10-25)06#-(1-3)#
PAGING GROUP
Sets an extension for Paging groups 1, 2, or 3.
None (No Paging group assigned)
1#: Paging group 1
2#: Paging group 2
3#: Paging group 3
NOTE : • Two or more settings can be assigned.
• To delete the input data, press the same data
number again.
(10-25: Ex-
C
tension No.)
(10-25: Ex-
C
tension No.)
(10-25: Ex-
CM
tension No.)
P-46
(10-25)07#-(0, 1 or 2)#
PRIME LINE PREFERENCE
This function is used to determine how an unoccupied
Trunk Group Exchange line can be accessed.
0#: No preference
1#: Pick up handset
2#: Pick up handset or press ON/OFF key
REFERENCE : See MODE 4 (10-25)08#.
(10-25)08#-(0, 1-3)#
PRIME LINE ACCESS GROUP
This setting is used to determine which pooled Trunk
Group is to be accessed when the prime line preference
function activated.
0#: 9/0
1#: 811
REFERENCE : See MODE 4 (10-25)07#.
(10-25)09#-(0 or 1)#
SENSOR ALARM RING
0#: No ring (Ext.11-25)
1#: Ring (Ext.10)
(10-25)10#-(0, 1-3)#
DOORPHONE RING
Sets an extension to receive doophone calls.
0#: No doorphone ring (Ext.11-25)
1#: Doorphone A ring only
2#: Doorphone B ring only
3#: Doorphone A and B ring (Ext.10)
(10-25)11#-(0 or 1)#
CALL DURATION DISPLAY
Displays conversation time on an LCD telephone.
0#: Conversation time not displayed
1#: Conversation time displayed
(10-25: Ex-
C
tension No.)
(10-25: Ex-
C
tension No.)
2#: 812
3#: 813
(10-25: Ex-
C
tension No.)
(10-25: Ex-
C
tension No.)
(10-25: Ex-
C
tension No.)