Table of Contents
Advertisement
Hardware Setup
Installing the Stand
1. Leave the PC in its protective foam packaging. Align the stand bracket to the rear
groove.
2. Tighten the stand bracket with screws.
3. Connect the base to the stand and tighten the base screw to secure the base.
4. Align and push the hinge cover towards the rear groove until it locks in place.
5. Make sure the stand assembly is properly installed before setting the PC upright.
PRO AP243TP 12M, PRO AP243P 13M, PRO AP243TP 13M
2
1
3
10
Getting Started
Advertisement
Table of Contents
