Midea MKG Series Technical & Service Manual page 29

AC Fan Coil Unit Two-pipe Wall-mounted Series
At the first debugging, completely expel air from coils via expelling valve.
12.6 Wiring
Cautions:
• The reserved function is indicated in broken line table, users can select it when necessary.
• An all-pole disconnection device which has at least 3mm separation distance in all pole and a residual current
device (RCD) with the rating of above 10mA shall be incorporated in the fixed wiring according to the national rule.
• The appliance shall be installed in accordance with national wiring regulations.
Take out the faceplate, and then dismantle the display cover.
Individual connect the power cord and signal line, adjust the dial switch.
12.6.1 Terminal Board Diagram
The wiring diagram please refers to chapter 9.
Note:
The air-conditioners can connect with Central Control Monitor (CCM). Before operation, please wiring correctly and set system address and network address
of indoor units.
- 28 -